On Friday, September 16, 2016 1:49:59 PM CEST Kishon Vijay Abraham I wrote:
>
> I think the offset information can come from the devicetree too. The phy can be
> modeled something like below.
>
> usb-phys@c0000000 {
> compatible = "amlogic,meson-gxbb-usb2-phy";
> reg = <0x0 0xc0000000 0x0 0x40>;
> #address-cells = <2>;
> #size-cells = <2>;
> ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x40>;
> resets = <&reset 34>;
>
> usb0_phy: usb_phy@0 {
> #phy-cells = <0>;
> reg = <0x0 0x0 0x0 0x20>;
> clocks = <&clkc CLKID_USB &clkc CLKID_USB0>;
> clock-names = "usb_general", "usb";
> status = "disabled";
> };
>
> usb1_phy: usb_phy@20 {
> #phy-cells = <0>;
> reg = <0x0 0x20 0x0 0x20>;
> clocks = <&clkc CLKID_USB &clkc CLKID_USB1>;
> clock-names = "usb_general", "usb";
> status = "disabled";
> };
> };
>
> This way the driver will be probed only once (the reset can be done during
> probe). The phy driver should scan the dt node and for every sub-node it
> invokes phy_create?
Why not just use #phy-cells=<1> and pass the phy number as an argument
in the reference?
Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
