STiH415/6 SoC's are being removed from the kernel. This
patch removes the compatibles from the dt doc and also
updates the example to a supported platform.
Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
Cc: <rui.zhang@xxxxxxxxx>
Cc: <edubezval@xxxxxxxxx>
Cc: <robh+dt@xxxxxxxxxx>
---
.../devicetree/bindings/thermal/st-thermal.txt | 28 +++++++---------------
1 file changed, 9 insertions(+), 19 deletions(-)
diff --git a/Documentation/devicetree/bindings/thermal/st-thermal.txt b/Documentation/devicetree/bindings/thermal/st-thermal.txt
index 3b9251b..a2f9391 100644
--- a/Documentation/devicetree/bindings/thermal/st-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/st-thermal.txt
@@ -3,17 +3,8 @@ Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs.
Required parameters:
-------------------
-compatible : st,<SoC>-<module>-thermal; should be one of:
- "st,stih415-sas-thermal",
- "st,stih415-mpe-thermal",
- "st,stih416-sas-thermal"
- "st,stih416-mpe-thermal"
- "st,stid127-thermal" or
- "st,stih407-thermal"
- according to the SoC type (stih415, stih416, stid127, stih407)
- and module type (sas or mpe). On stid127 & stih407 there is only
- one die/module, so there is no module type in the compatible
- string.
+compatible : Should be "st,stih407-thermal"
+
clock-names : Should be "thermal".
See: Documentation/devicetree/bindings/resource-names.txt
clocks : Phandle of the clock used by the thermal sensor.
@@ -25,18 +16,17 @@ Optional parameters:
reg : For non-sysconf based sensors, this should be the physical base
address and length of the sensor's registers.
interrupts : Standard way to define interrupt number.
- Interrupt is mandatory to be defined when compatible is
- "stih416-mpe-thermal".
NB: For thermal sensor's for which no interrupt has been
defined, a polling delay of 1000ms will be used to read the
temperature from device.
Example:
- temp1@fdfe8000 {
- compatible = "st,stih416-mpe-thermal";
- reg = <0xfdfe8000 0x10>;
- clock-names = "thermal";
- clocks = <&clk_m_mpethsens>;
- interrupts = <GIC_SPI 23 IRQ_TYPE_NONE>;
+ temp0@91a0000 {
+ compatible = "st,stih407-thermal";
+ reg = <0x91a0000 0x28>;
+ clock-names = "thermal";
+ clocks = <&CLK_SYSIN>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+ st,passive_cooling_temp = <110>;
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
