Re: [PATCH v9 01/19] remoteproc: st_slim_rproc: add a slimcore rproc driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon 05 Sep 06:16 PDT 2016, Peter Griffin wrote:

> slim core is used as a basis for many IPs in the STi
> chipsets such as fdma and demux. To avoid duplicating
> the elf loading code in each device driver a slim
> rproc driver has been created.
> 
> This driver is designed to be used by other device drivers
> such as fdma, or demux whose IP is based around a slim core.
> The device driver can call slim_rproc_alloc() to allocate
> a slim rproc and slim_rproc_put() when finished.
> 
> This driver takes care of ioremapping the slim
> registers (dmem, imem, slimcore, peripherals), whose offsets
> and sizes can change between IP's. It also obtains and enables
> any clocks used by the device. This approach avoids having
> a double mapping of the registers as slim_rproc does not register
> its own platform device. It also maps well to device tree
> abstraction as it allows us to have one dt node for the whole
> device.
> 
> All of the generic rproc elf loading code can be reused, and
> we provide start() stop() hooks to start and stop the slim
> core once the firmware has been loaded. This has been tested
> successfully with fdma driver.
> 
> Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>

Acked-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn

> ---
>  drivers/remoteproc/Kconfig               |   4 +
>  drivers/remoteproc/Makefile              |   1 +
>  drivers/remoteproc/st_slim_rproc.c       | 364 +++++++++++++++++++++++++++++++
>  include/linux/remoteproc/st_slim_rproc.h |  58 +++++
>  4 files changed, 427 insertions(+)
>  create mode 100644 drivers/remoteproc/st_slim_rproc.c
>  create mode 100644 include/linux/remoteproc/st_slim_rproc.h
> 
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index 1a8bf76a..a7bedc6 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -100,4 +100,8 @@ config ST_REMOTEPROC
>  	  processor framework.
>  	  This can be either built-in or a loadable module.
>  
> +config ST_SLIM_REMOTEPROC
> +	tristate
> +	select REMOTEPROC
> +
>  endmenu
> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> index 92d3758..db1dae7 100644
> --- a/drivers/remoteproc/Makefile
> +++ b/drivers/remoteproc/Makefile
> @@ -14,3 +14,4 @@ obj-$(CONFIG_DA8XX_REMOTEPROC)		+= da8xx_remoteproc.o
>  obj-$(CONFIG_QCOM_MDT_LOADER)		+= qcom_mdt_loader.o
>  obj-$(CONFIG_QCOM_Q6V5_PIL)		+= qcom_q6v5_pil.o
>  obj-$(CONFIG_ST_REMOTEPROC)		+= st_remoteproc.o
> +obj-$(CONFIG_ST_SLIM_REMOTEPROC)	+= st_slim_rproc.o
> diff --git a/drivers/remoteproc/st_slim_rproc.c b/drivers/remoteproc/st_slim_rproc.c
> new file mode 100644
> index 0000000..1484e97
> --- /dev/null
> +++ b/drivers/remoteproc/st_slim_rproc.c
> @@ -0,0 +1,364 @@
> +/*
> + * SLIM core rproc driver
> + *
> + * Copyright (C) 2016 STMicroelectronics
> + *
> + * Author: Peter Griffin <peter.griffin@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/remoteproc.h>
> +#include <linux/remoteproc/st_slim_rproc.h>
> +#include "remoteproc_internal.h"
> +
> +/* SLIM core registers */
> +#define SLIM_ID_OFST		0x0
> +#define SLIM_VER_OFST		0x4
> +
> +#define SLIM_EN_OFST		0x8
> +#define SLIM_EN_RUN			BIT(0)
> +
> +#define SLIM_CLK_GATE_OFST	0xC
> +#define SLIM_CLK_GATE_DIS		BIT(0)
> +#define SLIM_CLK_GATE_RESET		BIT(2)
> +
> +#define SLIM_SLIM_PC_OFST	0x20
> +
> +/* DMEM registers */
> +#define SLIM_REV_ID_OFST	0x0
> +#define SLIM_REV_ID_MIN_MASK		GENMASK(15, 8)
> +#define SLIM_REV_ID_MIN(id)		((id & SLIM_REV_ID_MIN_MASK) >> 8)
> +#define SLIM_REV_ID_MAJ_MASK		GENMASK(23, 16)
> +#define SLIM_REV_ID_MAJ(id)		((id & SLIM_REV_ID_MAJ_MASK) >> 16)
> +
> +
> +/* peripherals registers */
> +#define SLIM_STBUS_SYNC_OFST	0xF88
> +#define SLIM_STBUS_SYNC_DIS		BIT(0)
> +
> +#define SLIM_INT_SET_OFST	0xFD4
> +#define SLIM_INT_CLR_OFST	0xFD8
> +#define SLIM_INT_MASK_OFST	0xFDC
> +
> +#define SLIM_CMD_CLR_OFST	0xFC8
> +#define SLIM_CMD_MASK_OFST	0xFCC
> +
> +static const char *mem_names[ST_SLIM_MEM_MAX] = {
> +	[ST_SLIM_DMEM]	= "dmem",
> +	[ST_SLIM_IMEM]	= "imem",
> +};
> +
> +static int slim_clk_get(struct st_slim_rproc *slim_rproc, struct device *dev)
> +{
> +	int clk, err;
> +
> +	for (clk = 0; clk < ST_SLIM_MAX_CLK; clk++) {
> +		slim_rproc->clks[clk] = of_clk_get(dev->of_node, clk);
> +		if (IS_ERR(slim_rproc->clks[clk])) {
> +			err = PTR_ERR(slim_rproc->clks[clk]);
> +			if (err == -EPROBE_DEFER)
> +				goto err_put_clks;
> +			slim_rproc->clks[clk] = NULL;
> +			break;
> +		}
> +	}
> +
> +	return 0;
> +
> +err_put_clks:
> +	while (--clk >= 0)
> +		clk_put(slim_rproc->clks[clk]);
> +
> +	return err;
> +}
> +
> +static void slim_clk_disable(struct st_slim_rproc *slim_rproc)
> +{
> +	int clk;
> +
> +	for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++)
> +		clk_disable_unprepare(slim_rproc->clks[clk]);
> +}
> +
> +static int slim_clk_enable(struct st_slim_rproc *slim_rproc)
> +{
> +	int clk, ret;
> +
> +	for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++) {
> +		ret = clk_prepare_enable(slim_rproc->clks[clk]);
> +		if (ret)
> +			goto err_disable_clks;
> +	}
> +
> +	return 0;
> +
> +err_disable_clks:
> +	while (--clk >= 0)
> +		clk_disable_unprepare(slim_rproc->clks[clk]);
> +
> +	return ret;
> +}
> +
> +/*
> + * Remoteproc slim specific device handlers
> + */
> +static int slim_rproc_start(struct rproc *rproc)
> +{
> +	struct device *dev = &rproc->dev;
> +	struct st_slim_rproc *slim_rproc = rproc->priv;
> +	unsigned long hw_id, hw_ver, fw_rev;
> +	u32 val;
> +
> +	/* disable CPU pipeline clock & reset CPU pipeline */
> +	val = SLIM_CLK_GATE_DIS | SLIM_CLK_GATE_RESET;
> +	writel(val, slim_rproc->slimcore + SLIM_CLK_GATE_OFST);
> +
> +	/* disable SLIM core STBus sync */
> +	writel(SLIM_STBUS_SYNC_DIS, slim_rproc->peri + SLIM_STBUS_SYNC_OFST);
> +
> +	/* enable cpu pipeline clock */
> +	writel(!SLIM_CLK_GATE_DIS,
> +		slim_rproc->slimcore + SLIM_CLK_GATE_OFST);
> +
> +	/* clear int & cmd mailbox */
> +	writel(~0U, slim_rproc->peri + SLIM_INT_CLR_OFST);
> +	writel(~0U, slim_rproc->peri + SLIM_CMD_CLR_OFST);
> +
> +	/* enable all channels cmd & int */
> +	writel(~0U, slim_rproc->peri + SLIM_INT_MASK_OFST);
> +	writel(~0U, slim_rproc->peri + SLIM_CMD_MASK_OFST);
> +
> +	/* enable cpu */
> +	writel(SLIM_EN_RUN, slim_rproc->slimcore + SLIM_EN_OFST);
> +
> +	hw_id = readl_relaxed(slim_rproc->slimcore + SLIM_ID_OFST);
> +	hw_ver = readl_relaxed(slim_rproc->slimcore + SLIM_VER_OFST);
> +
> +	fw_rev = readl(slim_rproc->mem[ST_SLIM_DMEM].cpu_addr +
> +			SLIM_REV_ID_OFST);
> +
> +	dev_info(dev, "fw rev:%ld.%ld on SLIM %ld.%ld\n",
> +		 SLIM_REV_ID_MAJ(fw_rev), SLIM_REV_ID_MIN(fw_rev),
> +		 hw_id, hw_ver);
> +
> +	return 0;
> +}
> +
> +static int slim_rproc_stop(struct rproc *rproc)
> +{
> +	struct st_slim_rproc *slim_rproc = rproc->priv;
> +	u32 val;
> +
> +	/* mask all (cmd & int) channels */
> +	writel(0UL, slim_rproc->peri + SLIM_INT_MASK_OFST);
> +	writel(0UL, slim_rproc->peri + SLIM_CMD_MASK_OFST);
> +
> +	/* disable cpu pipeline clock */
> +	writel(SLIM_CLK_GATE_DIS, slim_rproc->slimcore + SLIM_CLK_GATE_OFST);
> +
> +	writel(!SLIM_EN_RUN, slim_rproc->slimcore + SLIM_EN_OFST);
> +
> +	val = readl(slim_rproc->slimcore + SLIM_EN_OFST);
> +	if (val & SLIM_EN_RUN)
> +		dev_warn(&rproc->dev, "Failed to disable SLIM");
> +
> +	dev_dbg(&rproc->dev, "slim stopped\n");
> +
> +	return 0;
> +}
> +
> +static void *slim_rproc_da_to_va(struct rproc *rproc, u64 da, int len)
> +{
> +	struct st_slim_rproc *slim_rproc = rproc->priv;
> +	void *va = NULL;
> +	int i;
> +
> +	for (i = 0; i < ST_SLIM_MEM_MAX; i++) {
> +		if (da != slim_rproc->mem[i].bus_addr)
> +			continue;
> +
> +		if (len <= slim_rproc->mem[i].size) {
> +			/* __force to make sparse happy with type conversion */
> +			va = (__force void *)slim_rproc->mem[i].cpu_addr;
> +			break;
> +		}
> +	}
> +
> +	dev_dbg(&rproc->dev, "da = 0x%llx len = 0x%x va = 0x%p\n", da, len, va);
> +
> +	return va;
> +}
> +
> +static struct rproc_ops slim_rproc_ops = {
> +	.start		= slim_rproc_start,
> +	.stop		= slim_rproc_stop,
> +	.da_to_va       = slim_rproc_da_to_va,
> +};
> +
> +/*
> + * Firmware handler operations: sanity, boot address, load ...
> + */
> +
> +static struct resource_table empty_rsc_tbl = {
> +	.ver = 1,
> +	.num = 0,
> +};
> +
> +static struct resource_table *slim_rproc_find_rsc_table(struct rproc *rproc,
> +					       const struct firmware *fw,
> +					       int *tablesz)
> +{
> +	*tablesz = sizeof(empty_rsc_tbl);
> +	return &empty_rsc_tbl;
> +}
> +
> +static struct rproc_fw_ops slim_rproc_fw_ops = {
> +	.find_rsc_table = slim_rproc_find_rsc_table,
> +};
> +
> +/**
> + * st_slim_rproc_alloc() - allocate and initialise slim rproc
> + * @pdev: Pointer to the platform_device struct
> + * @fw_name: Name of firmware for rproc to use
> + *
> + * Function for allocating and initialising a slim rproc for use by
> + * device drivers whose IP is based around the SLIM core. It
> + * obtains and enables any clocks required by the SLIM core and also
> + * ioremaps the various IO.
> + *
> + * Returns st_slim_rproc pointer or PTR_ERR() on error.
> + */
> +
> +struct st_slim_rproc *st_slim_rproc_alloc(struct platform_device *pdev,
> +				char *fw_name)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct st_slim_rproc *slim_rproc;
> +	struct device_node *np = dev->of_node;
> +	struct rproc *rproc;
> +	struct resource *res;
> +	int err, i;
> +	const struct rproc_fw_ops *elf_ops;
> +
> +	if (!fw_name)
> +		return ERR_PTR(-EINVAL);
> +
> +	if (!of_device_is_compatible(np, "st,slim-rproc"))
> +		return ERR_PTR(-EINVAL);
> +
> +	rproc = rproc_alloc(dev, np->name, &slim_rproc_ops,
> +			fw_name, sizeof(*slim_rproc));
> +	if (!rproc)
> +		return ERR_PTR(-ENOMEM);
> +
> +	rproc->has_iommu = false;
> +
> +	slim_rproc = rproc->priv;
> +	slim_rproc->rproc = rproc;
> +
> +	elf_ops = rproc->fw_ops;
> +	/* Use some generic elf ops */
> +	slim_rproc_fw_ops.load = elf_ops->load;
> +	slim_rproc_fw_ops.sanity_check = elf_ops->sanity_check;
> +
> +	rproc->fw_ops = &slim_rproc_fw_ops;
> +
> +	/* get imem and dmem */
> +	for (i = 0; i < ARRAY_SIZE(mem_names); i++) {
> +		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> +						mem_names[i]);
> +
> +		slim_rproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res);
> +		if (IS_ERR(slim_rproc->mem[i].cpu_addr)) {
> +			dev_err(&pdev->dev, "devm_ioremap_resource failed\n");
> +			err = PTR_ERR(slim_rproc->mem[i].cpu_addr);
> +			goto err;
> +		}
> +		slim_rproc->mem[i].bus_addr = res->start;
> +		slim_rproc->mem[i].size = resource_size(res);
> +	}
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "slimcore");
> +	slim_rproc->slimcore = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(slim_rproc->slimcore)) {
> +		dev_err(&pdev->dev, "failed to ioremap slimcore IO\n");
> +		err = PTR_ERR(slim_rproc->slimcore);
> +		goto err;
> +	}
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "peripherals");
> +	slim_rproc->peri = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(slim_rproc->peri)) {
> +		dev_err(&pdev->dev, "failed to ioremap peripherals IO\n");
> +		err = PTR_ERR(slim_rproc->peri);
> +		goto err;
> +	}
> +
> +	err = slim_clk_get(slim_rproc, dev);
> +	if (err)
> +		goto err;
> +
> +	err = slim_clk_enable(slim_rproc);
> +	if (err) {
> +		dev_err(dev, "Failed to enable clocks\n");
> +		goto err_clk_put;
> +	}
> +
> +	/* Register as a remoteproc device */
> +	err = rproc_add(rproc);
> +	if (err) {
> +		dev_err(dev, "registration of slim remoteproc failed\n");
> +		goto err_clk_dis;
> +	}
> +
> +	return slim_rproc;
> +
> +err_clk_dis:
> +	slim_clk_disable(slim_rproc);
> +err_clk_put:
> +	for (i = 0; i < ST_SLIM_MAX_CLK && slim_rproc->clks[i]; i++)
> +		clk_put(slim_rproc->clks[i]);
> +err:
> +	rproc_put(rproc);
> +	return ERR_PTR(err);
> +}
> +EXPORT_SYMBOL(st_slim_rproc_alloc);
> +
> +/**
> +  * st_slim_rproc_put() - put slim rproc resources
> +  * @slim_rproc: Pointer to the st_slim_rproc struct
> +  *
> +  * Function for calling respective _put() functions on slim_rproc resources.
> +  *
> +  */
> +void st_slim_rproc_put(struct st_slim_rproc *slim_rproc)
> +{
> +	int clk;
> +
> +	if (!slim_rproc)
> +		return;
> +
> +	slim_clk_disable(slim_rproc);
> +
> +	for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++)
> +		clk_put(slim_rproc->clks[clk]);
> +
> +	rproc_del(slim_rproc->rproc);
> +	rproc_put(slim_rproc->rproc);
> +}
> +EXPORT_SYMBOL(st_slim_rproc_put);
> +
> +MODULE_AUTHOR("Peter Griffin <peter.griffin@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("STMicroelectronics SLIM core rproc driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/remoteproc/st_slim_rproc.h b/include/linux/remoteproc/st_slim_rproc.h
> new file mode 100644
> index 0000000..4155556
> --- /dev/null
> +++ b/include/linux/remoteproc/st_slim_rproc.h
> @@ -0,0 +1,58 @@
> +/*
> + * SLIM core rproc driver header
> + *
> + * Copyright (C) 2016 STMicroelectronics
> + *
> + * Author: Peter Griffin <peter.griffin@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +#ifndef _ST_REMOTEPROC_SLIM_H
> +#define _ST_REMOTEPROC_SLIM_H
> +
> +#define ST_SLIM_MEM_MAX 2
> +#define ST_SLIM_MAX_CLK 4
> +
> +enum {
> +	ST_SLIM_DMEM,
> +	ST_SLIM_IMEM,
> +};
> +
> +/**
> + * struct st_slim_mem - slim internal memory structure
> + * @cpu_addr: MPU virtual address of the memory region
> + * @bus_addr: Bus address used to access the memory region
> + * @size: Size of the memory region
> + */
> +struct st_slim_mem {
> +	void __iomem *cpu_addr;
> +	phys_addr_t bus_addr;
> +	size_t size;
> +};
> +
> +/**
> + * struct st_slim_rproc - SLIM slim core
> + * @rproc: rproc handle
> + * @mem: slim memory information
> + * @slimcore: slim slimcore regs
> + * @peri: slim peripheral regs
> + * @clks: slim clocks
> + */
> +struct st_slim_rproc {
> +	struct rproc *rproc;
> +	struct st_slim_mem mem[ST_SLIM_MEM_MAX];
> +	void __iomem *slimcore;
> +	void __iomem *peri;
> +
> +	/* st_slim_rproc private */
> +	struct clk *clks[ST_SLIM_MAX_CLK];
> +};
> +
> +struct st_slim_rproc *st_slim_rproc_alloc(struct platform_device *pdev,
> +					char *fw_name);
> +void st_slim_rproc_put(struct st_slim_rproc *slim_rproc);
> +
> +#endif
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux