Hi,
Am Dienstag, 13. September 2016, 17:27:02 CEST schrieb Andy Yan:
> Add the device tree binding documentation for Light & Proximity sensor
> STK331X from Sensortek
>
> Signed-off-by: Andy Yan <andy.yan@xxxxxxxxxxxxxx>
> ---
>
> .../devicetree/bindings/iio/light/stk3310.txt | 21
> +++++++++++++++++++++ 1 file changed, 21 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/light/stk3310.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/light/stk3310.txt
> b/Documentation/devicetree/bindings/iio/light/stk3310.txt new file mode
> 100644
> index 0000000..d697118
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/light/stk3310.txt
> @@ -0,0 +1,21 @@
> +* Sensortek STK331X I2C Light&Proximity sensor
> +
> +Required properties:
> +- compatible: should be "sensortek,STK3310" or "sensortek,STK3311"
I guess that is more a question for Rob / Jonathan regarding the casing.
The stk3310 drivers currently provides both an acpi as well as an i2c module
table and in both the naming is in upper-case ... probably the i2c table being
simply a copy of the acpi table.
By using the i2c-quirk of extracting the i2c-id from the compatible, the
binding here would codify this upper case, while normally i2c tables as well
as dt-bindings are all lower case.
Looking at kernel c-code and current mainline devicetree files, it doesn't look
like the i2c-ids gets used anywhere yet, so I guess we could do:
- keep acpi-ids as they are
- make i2c-ids lower-case
- make dt-binding lower-case (and it can still use the i2c quirk to not need a
separate of id-table)
alternatively we could also just add a separate of-id table with the lower-
case compatible elements.
Heiko
> +- reg: the I2C address of the device
> +- interrupt-parent: phandle to the parent interrupt controller
> +- interrupts: interrupt mapping for GPIO IRQ
> +
> +Example:
> + &i2c1 {
> + /* ... */
> +
> + stk3310@48 {
> + compatible = "sensortek,STK3310";
> + reg = <0x48>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> + };
> +
> + /* ... */
> + };
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
