On Thu, Sep 01, 2016 at 02:22:55PM +0300, Peter Ujfalusi wrote: > There are display panels which demands that the sync signal is driven on > different edge than the pixel data. > With the syncclk-active property we can specify the clk edge to be used to > drive the sync signal. When the property is missing it indicates that the > sync is driven on the same edge as the pixel data. > > Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx> > CC: Rob Herring <robh+dt@xxxxxxxxxx> > CC: Mark Rutland <mark.rutland@xxxxxxx> > CC: devicetree@xxxxxxxxxxxxxxx > --- > Documentation/devicetree/bindings/display/panel/display-timing.txt | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/panel/display-timing.txt b/Documentation/devicetree/bindings/display/panel/display-timing.txt > index e1d4a0b59612..1436292e7a56 100644 > --- a/Documentation/devicetree/bindings/display/panel/display-timing.txt > +++ b/Documentation/devicetree/bindings/display/panel/display-timing.txt > @@ -32,6 +32,12 @@ optional properties: > - active low = drive pixel data on falling edge/ > sample data on rising edge > - ignored = ignored > + - syncclk-active: with > + - active high = drive sync on rising edge/ rising edge of what? pixel clk? > + sample sync on falling edge > + - active low = drive sync on falling edge/ > + sample sync on rising edge > + - omitted = same configuration as pixelclk-active > - interlaced (bool): boolean to enable interlaced mode > - doublescan (bool): boolean to enable doublescan mode > - doubleclk (bool): boolean to enable doubleclock mode > -- > 2.9.3 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
