On Thu, Sep 01, 2016 at 12:09:07PM +0300, Jyri Sarha wrote: > Add "blue-and-red-wiring"-device tree property and update devicetree > binding document. > > The red and blue components are reversed between 24 and 16 bit modes > on am335x LCDC output pins. To get 24 RGB format the red and blue > wires has to be crossed and this in turn causes 16 colors output to be > in BGR format. With straight wiring the 16 color is RGB and 24 bit is > BGR. > > The new property describes whether the red and blue wires are crossed > or not. If the property is not present or its value is not recognized > the legacy mode is assumed. The legacy configuration supports RGB565, > RGB888 and XRGB8888 formats. However, depending on wiring, the red and > blue colors are swapped in either 16 or 24-bit color modes. > > For more details see section 3.1.1 in AM335x Silicon Errata: > http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360 > > Signed-off-by: Jyri Sarha <jsarha@xxxxxx> > --- > .../devicetree/bindings/display/tilcdc/tilcdc.txt | 22 ++++++++++++ > drivers/gpu/drm/tilcdc/tilcdc_drv.c | 41 ++++++++++++++++++++++ > drivers/gpu/drm/tilcdc/tilcdc_drv.h | 4 +++ > drivers/gpu/drm/tilcdc/tilcdc_plane.c | 9 ++--- > 4 files changed, 70 insertions(+), 6 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt > index 6efa4c5..a5007aa 100644 > --- a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt > +++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt > @@ -17,6 +17,18 @@ Optional properties: > the lcd controller. > - max-pixelclock: The maximum pixel clock that can be supported > by the lcd controller in KHz. > + - blue-and-red-wiring: Recognized values "default", "straight" or Need to drop default from here. With that, Acked-by: Rob Herring <robh@xxxxxxxxxx> > + "crossed". This property deals with the LCDC revision 2 (found on > + AM335x) color errata [1]. > + - "straight" indicates normal wiring that supports RGB565, > + BGR888, and XBGR8888 color formats. > + - "crossed" indicates wiring that has blue and red wires > + crossed. This setup supports BGR565, RGB888 and XRGB8888 > + formats. > + - If the property is not present or its value is not recognized > + the legacy mode is assumed. This configuration supports RGB565, > + RGB888 and XRGB8888 formats. However, depending on wiring, the red > + and blue colors are swapped in either 16 or 24-bit color modes. > > Optional nodes: > > @@ -28,6 +40,14 @@ Optional nodes: > Documentation/devicetree/bindings/display/tilcdc/tfp410.txt for connecting > tfp410 DVI encoder or lcd panel to lcdc > > +[1] There is an errata about AM335x color wiring. For 16-bit color mode > + the wires work as they should (LCD_DATA[0:4] is for Blue[3:7]), > + but for 24 bit color modes the wiring of blue and red components is > + crossed and LCD_DATA[0:4] is for Red[3:7] and LCD_DATA[11:15] is > + for Blue[3-7]. For more details see section 3.1.1 in AM335x > + Silicon Errata: > + http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360 > + > Example: > > fb: fb@4830e000 { > @@ -37,6 +57,8 @@ Example: > interrupts = <36>; > ti,hwmods = "lcdc"; > > + blue-and-red-wiring = "crossed"; > + > port { > lcdc_0: endpoint@0 { > remote-endpoint = <&hdmi_0>; > diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c > index e45c268..ed4dc5c 100644 > --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.c > +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c > @@ -33,6 +33,20 @@ > > static LIST_HEAD(module_list); > > +static const u32 tilcdc_rev1_formats[] = { DRM_FORMAT_RGB565 }; > + > +static const u32 tilcdc_straight_formats[] = { DRM_FORMAT_RGB565, > + DRM_FORMAT_BGR888, > + DRM_FORMAT_XBGR8888 }; > + > +static const u32 tilcdc_crossed_formats[] = { DRM_FORMAT_BGR565, > + DRM_FORMAT_RGB888, > + DRM_FORMAT_XRGB8888 }; > + > +static const u32 tilcdc_legacy_formats[] = { DRM_FORMAT_RGB565, > + DRM_FORMAT_RGB888, > + DRM_FORMAT_XRGB8888 }; > + > void tilcdc_module_init(struct tilcdc_module *mod, const char *name, > const struct tilcdc_module_ops *funcs) > { > @@ -318,6 +332,33 @@ static int tilcdc_load(struct drm_device *dev, unsigned long flags) > > pm_runtime_put_sync(dev->dev); > > + if (priv->rev == 1) { > + DBG("Revision 1 LCDC supports only RGB565 format"); > + priv->pixelformats = tilcdc_rev1_formats; > + priv->num_pixelformats = ARRAY_SIZE(tilcdc_rev1_formats); > + } else { > + const char *str = "\0"; > + > + of_property_read_string(node, "blue-and-red-wiring", &str); > + if (0 == strcmp(str, "crossed")) { > + DBG("Configured for crossed blue and red wires"); > + priv->pixelformats = tilcdc_crossed_formats; > + priv->num_pixelformats = > + ARRAY_SIZE(tilcdc_crossed_formats); > + } else if (0 == strcmp(str, "straight")) { > + DBG("Configured for straight blue and red wires"); > + priv->pixelformats = tilcdc_straight_formats; > + priv->num_pixelformats = > + ARRAY_SIZE(tilcdc_straight_formats); > + } else { > + DBG("Blue and red wiring '%s' unknown, use legacy mode", > + str); > + priv->pixelformats = tilcdc_legacy_formats; > + priv->num_pixelformats = > + ARRAY_SIZE(tilcdc_legacy_formats); > + } > + } > + > ret = modeset_init(dev); > if (ret < 0) { > dev_err(dev->dev, "failed to initialize mode setting\n"); > diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.h b/drivers/gpu/drm/tilcdc/tilcdc_drv.h > index 13001df..0e19c14 100644 > --- a/drivers/gpu/drm/tilcdc/tilcdc_drv.h > +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.h > @@ -65,6 +65,10 @@ struct tilcdc_drm_private { > */ > uint32_t max_width; > > + /* Supported pixel formats */ > + const uint32_t *pixelformats; > + uint32_t num_pixelformats; > + > /* The context for pm susped/resume cycle is stored here */ > struct drm_atomic_state *saved_state; > > diff --git a/drivers/gpu/drm/tilcdc/tilcdc_plane.c b/drivers/gpu/drm/tilcdc/tilcdc_plane.c > index 41911e3..74c65fa 100644 > --- a/drivers/gpu/drm/tilcdc/tilcdc_plane.c > +++ b/drivers/gpu/drm/tilcdc/tilcdc_plane.c > @@ -24,10 +24,6 @@ > > #include "tilcdc_drv.h" > > -static const u32 tilcdc_formats[] = { DRM_FORMAT_RGB565, > - DRM_FORMAT_RGB888, > - DRM_FORMAT_XRGB8888 }; > - > static struct drm_plane_funcs tilcdc_plane_funcs = { > .update_plane = drm_atomic_helper_update_plane, > .disable_plane = drm_atomic_helper_disable_plane, > @@ -114,12 +110,13 @@ static const struct drm_plane_helper_funcs plane_helper_funcs = { > int tilcdc_plane_init(struct drm_device *dev, > struct drm_plane *plane) > { > + struct tilcdc_drm_private *priv = dev->dev_private; > int ret; > > ret = drm_plane_init(dev, plane, 1, > &tilcdc_plane_funcs, > - tilcdc_formats, > - ARRAY_SIZE(tilcdc_formats), > + priv->pixelformats, > + priv->num_pixelformats, > true); > if (ret) { > dev_err(dev->dev, "Failed to initialize plane: %d\n", ret); > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
