Add CRG driver for Hi3798CV200 SoC. CRG(Clock and Reset Generator) module generates clock and reset signals used by other module blocks on SoC. Signed-off-by: Jiancheng Xue <xuejiancheng@xxxxxxxxxxxxx> --- .../devicetree/bindings/clock/hi3519-crg.txt | 46 ---- .../devicetree/bindings/clock/hisi-crg.txt | 49 ++++ drivers/clk/hisilicon/Kconfig | 8 + drivers/clk/hisilicon/Makefile | 1 + drivers/clk/hisilicon/crg-hi3798cv200.c | 304 +++++++++++++++++++++ drivers/clk/hisilicon/crg.h | 39 +++ include/dt-bindings/clock/histb-clock.h | 64 +++++ 7 files changed, 465 insertions(+), 46 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/hi3519-crg.txt create mode 100644 Documentation/devicetree/bindings/clock/hisi-crg.txt create mode 100644 drivers/clk/hisilicon/crg-hi3798cv200.c create mode 100644 drivers/clk/hisilicon/crg.h create mode 100644 include/dt-bindings/clock/histb-clock.h diff --git a/Documentation/devicetree/bindings/clock/hi3519-crg.txt b/Documentation/devicetree/bindings/clock/hi3519-crg.txt deleted file mode 100644 index acd1f23..0000000 --- a/Documentation/devicetree/bindings/clock/hi3519-crg.txt +++ /dev/null @@ -1,46 +0,0 @@ -* Hisilicon Hi3519 Clock and Reset Generator(CRG) - -The Hi3519 CRG module provides clock and reset signals to various -controllers within the SoC. - -This binding uses the following bindings: - Documentation/devicetree/bindings/clock/clock-bindings.txt - Documentation/devicetree/bindings/reset/reset.txt - -Required Properties: - -- compatible: should be one of the following. - - "hisilicon,hi3519-crg" - controller compatible with Hi3519 SoC. - -- reg: physical base address of the controller and length of memory mapped - region. - -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes use this identifier -to specify the clock which they consume. - -All these identifier could be found in <dt-bindings/clock/hi3519-clock.h>. - -- #reset-cells: should be 2. - -A reset signal can be controlled by writing a bit register in the CRG module. -The reset specifier consists of two cells. The first cell represents the -register offset relative to the base address. The second cell represents the -bit index in the register. - -Example: CRG nodes -CRG: clock-reset-controller@12010000 { - compatible = "hisilicon,hi3519-crg"; - reg = <0x12010000 0x10000>; - #clock-cells = <1>; - #reset-cells = <2>; -}; - -Example: consumer nodes -i2c0: i2c@12110000 { - compatible = "hisilicon,hi3519-i2c"; - reg = <0x12110000 0x1000>; - clocks = <&CRG HI3519_I2C0_RST>; - resets = <&CRG 0xe4 0>; -}; diff --git a/Documentation/devicetree/bindings/clock/hisi-crg.txt b/Documentation/devicetree/bindings/clock/hisi-crg.txt new file mode 100644 index 0000000..e3919b6 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hisi-crg.txt @@ -0,0 +1,49 @@ +* HiSilicon Clock and Reset Generator(CRG) + +The CRG module provides clock and reset signals to various +modules within the SoC. + +This binding uses the following bindings: + Documentation/devicetree/bindings/clock/clock-bindings.txt + Documentation/devicetree/bindings/reset/reset.txt + +Required Properties: + +- compatible: should be one of the following. + - "hisilicon,hi3516cv300-crg" + - "hisilicon,hi3519-crg" + - "hisilicon,hi3798cv200-crg" + - "hisilicon,hi3798cv200-sysctrl" + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hi3519-clock.h>. + +- #reset-cells: should be 2. + +A reset signal can be controlled by writing a bit register in the CRG module. +The reset specifier consists of two cells. The first cell represents the +register offset relative to the base address. The second cell represents the +bit index in the register. + +Example: CRG nodes +CRG: clock-reset-controller@12010000 { + compatible = "hisilicon,hi3519-crg"; + reg = <0x12010000 0x10000>; + #clock-cells = <1>; + #reset-cells = <2>; +}; + +Example: consumer nodes +i2c0: i2c@12110000 { + compatible = "hisilicon,hi3519-i2c"; + reg = <0x12110000 0x1000>; + clocks = <&CRG HI3519_I2C0_RST>; + resets = <&CRG 0xe4 0>; +}; diff --git a/drivers/clk/hisilicon/Kconfig b/drivers/clk/hisilicon/Kconfig index 3f537a0..c41b6d2 100644 --- a/drivers/clk/hisilicon/Kconfig +++ b/drivers/clk/hisilicon/Kconfig @@ -6,6 +6,14 @@ config COMMON_CLK_HI3519 help Build the clock driver for hi3519. +config COMMON_CLK_HI3798CV200 + tristate "Hi3798CV200 Clock Driver" + depends on ARCH_HISI || COMPILE_TEST + select RESET_HISI + default ARCH_HISI + help + Build the clock driver for hi3798cv200. + config COMMON_CLK_HI6220 bool "Hi6220 Clock Driver" depends on ARCH_HISI || COMPILE_TEST diff --git a/drivers/clk/hisilicon/Makefile b/drivers/clk/hisilicon/Makefile index e169ec7..233d809 100644 --- a/drivers/clk/hisilicon/Makefile +++ b/drivers/clk/hisilicon/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_ARCH_HI3xxx) += clk-hi3620.o obj-$(CONFIG_ARCH_HIP04) += clk-hip04.o obj-$(CONFIG_ARCH_HIX5HD2) += clk-hix5hd2.o obj-$(CONFIG_COMMON_CLK_HI3519) += clk-hi3519.o +obj-$(CONFIG_COMMON_CLK_HI3798CV200) += crg-hi3798cv200.o obj-$(CONFIG_COMMON_CLK_HI6220) += clk-hi6220.o obj-$(CONFIG_RESET_HISI) += reset.o obj-$(CONFIG_STUB_CLK_HI6220) += clk-hi6220-stub.o diff --git a/drivers/clk/hisilicon/crg-hi3798cv200.c b/drivers/clk/hisilicon/crg-hi3798cv200.c new file mode 100644 index 0000000..b763b99 --- /dev/null +++ b/drivers/clk/hisilicon/crg-hi3798cv200.c @@ -0,0 +1,304 @@ +/* + * Hi3798CV200 Clock and Reset Generator Driver + * + * Copyright (c) 2016 HiSilicon Technologies Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <dt-bindings/clock/histb-clock.h> +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include "clk.h" +#include "crg.h" +#include "reset.h" + +/* hi3798CV200 core CRG */ +#define INNER_CLK_OFFSET 64 +#define FIXED_24M 65 +#define FIXED_25M 66 +#define FIXED_50M 67 +#define FIXED_75M 68 +#define FIXED_100M 69 +#define FIXED_150M 70 +#define FIXED_200M 71 +#define FIXED_250M 72 +#define FIXED_300M 73 +#define FIXED_400M 74 +#define MMC_MUX 75 + +#define HI3798CV200_CRG_NR_CLKS 128 + +static const struct hisi_fixed_rate_clock hi3798cv200_fixed_rate_clks[] = { + { OSC_CLK, "clk_osc", NULL, 0, 24000000, }, + { APB_CLK, "clk_apb", NULL, 0, 100000000, }, + { AHB_CLK, "clk_ahb", NULL, 0, 200000000, }, + { FIXED_24M, "24m", NULL, 0, 24000000, }, + { FIXED_25M, "25m", NULL, 0, 25000000, }, + { FIXED_50M, "50m", NULL, 0, 50000000, }, + { FIXED_75M, "75m", NULL, 0, 75000000, }, + { FIXED_100M, "100m", NULL, 0, 100000000, }, + { FIXED_150M, "150m", NULL, 0, 150000000, }, + { FIXED_200M, "200m", NULL, 0, 200000000, }, + { FIXED_250M, "250m", NULL, 0, 250000000, }, +}; + +static const char *const mmc_mux_p[] = { + "100m", "50m", "25m", "200m", "150m" }; +static u32 mmc_mux_table[] = {0, 1, 2, 3, 6}; + +static struct hisi_mux_clock hi3798cv200_mux_clks[] = { + { MMC_MUX, "mmc_mux", mmc_mux_p, ARRAY_SIZE(mmc_mux_p), + CLK_SET_RATE_PARENT, 0xa0, 8, 3, 0, mmc_mux_table, }, +}; + +static const struct hisi_gate_clock hi3798cv200_gate_clks[] = { + /* UART */ + { UART2_CLK, "clk_uart2", "75m", + CLK_SET_RATE_PARENT, 0x68, 4, 0, }, + /* I2C */ + { I2C0_CLK, "clk_i2c0", "clk_apb", + CLK_SET_RATE_PARENT, 0x6C, 4, 0, }, + { I2C1_CLK, "clk_i2c1", "clk_apb", + CLK_SET_RATE_PARENT, 0x6C, 8, 0, }, + { I2C2_CLK, "clk_i2c2", "clk_apb", + CLK_SET_RATE_PARENT, 0x6C, 12, 0, }, + { I2C3_CLK, "clk_i2c3", "clk_apb", + CLK_SET_RATE_PARENT, 0x6C, 16, 0, }, + { I2C4_CLK, "clk_i2c4", "clk_apb", + CLK_SET_RATE_PARENT, 0x6C, 20, 0, }, + /* SPI */ + { SPI0_CLK, "clk_spi0", "clk_apb", + CLK_SET_RATE_PARENT, 0x70, 0, 0, }, + /* SDIO */ + { SDIO0_BIU_CLK, "clk_sdio0_biu", "200m", + CLK_SET_RATE_PARENT, 0x9c, 0, 0, }, + { SDIO0_CIU_CLK, "clk_sdio0_ciu", "mmc_mux", + CLK_SET_RATE_PARENT, 0x9c, 1, 0, }, + /* EMMC */ + { MMC_BIU_CLK, "clk_mmc_biu", "200m", + CLK_SET_RATE_PARENT, 0xa0, 0, 0, }, + { MMC_CIU_CLK, "clk_mmc_ciu", "mmc_mux", + CLK_SET_RATE_PARENT, 0xa0, 1, 0, }, + /* PCIE*/ + { PCIE_BUS_CLK, "clk_pcie_bus", "200m", + CLK_SET_RATE_PARENT, 0x18c, 0, 0, }, + { PCIE_SYS_CLK, "clk_pcie_sys", "100m", + CLK_SET_RATE_PARENT, 0x18c, 1, 0, }, + { PCIE_PIPE_CLK, "clk_pcie_pipe", "250m", + CLK_SET_RATE_PARENT, 0x18c, 2, 0, }, + { PCIE_AUX_CLK, "clk_pcie_aux", "24m", + CLK_SET_RATE_PARENT, 0x18c, 3, 0, }, +}; + +static struct hisi_clock_data *hi3798cv200_clk_register( + struct platform_device *pdev) +{ + struct hisi_clock_data *clk_data; + int ret; + + clk_data = hisi_clk_alloc(pdev, HI3798CV200_CRG_NR_CLKS); + if (!clk_data) + return ERR_PTR(-ENOMEM); + + ret = hisi_clk_register_fixed_rate(hi3798cv200_fixed_rate_clks, + ARRAY_SIZE(hi3798cv200_fixed_rate_clks), + clk_data); + if (ret) + return ERR_PTR(ret); + + ret = hisi_clk_register_mux(hi3798cv200_mux_clks, + ARRAY_SIZE(hi3798cv200_mux_clks), + clk_data); + if (ret) + goto unregister_fixed_rate; + + ret = hisi_clk_register_gate(hi3798cv200_gate_clks, + ARRAY_SIZE(hi3798cv200_gate_clks), + clk_data); + if (ret) + goto unregister_mux; + + ret = of_clk_add_provider(pdev->dev.of_node, + of_clk_src_onecell_get, &clk_data->clk_data); + if (ret) + goto unregister_gate; + + return clk_data; + +unregister_fixed_rate: + hisi_clk_unregister_fixed_rate(hi3798cv200_fixed_rate_clks, + ARRAY_SIZE(hi3798cv200_fixed_rate_clks), + clk_data); + +unregister_mux: + hisi_clk_unregister_mux(hi3798cv200_mux_clks, + ARRAY_SIZE(hi3798cv200_mux_clks), + clk_data); +unregister_gate: + hisi_clk_unregister_gate(hi3798cv200_gate_clks, + ARRAY_SIZE(hi3798cv200_gate_clks), + clk_data); + return ERR_PTR(ret); +} + +static void hi3798cv200_clk_unregister(struct platform_device *pdev) +{ + struct hisi_crg_dev *crg = platform_get_drvdata(pdev); + + of_clk_del_provider(pdev->dev.of_node); + + hisi_clk_unregister_gate(hi3798cv200_gate_clks, + ARRAY_SIZE(hi3798cv200_gate_clks), + crg->clk_data); + hisi_clk_unregister_mux(hi3798cv200_mux_clks, + ARRAY_SIZE(hi3798cv200_mux_clks), + crg->clk_data); + hisi_clk_unregister_fixed_rate(hi3798cv200_fixed_rate_clks, + ARRAY_SIZE(hi3798cv200_fixed_rate_clks), + crg->clk_data); +} + +static struct hisi_crg_funcs hi3798cv200_crg_funcs = { + .register_clks = hi3798cv200_clk_register, + .unregister_clks = hi3798cv200_clk_unregister, +}; + +/* hi3798CV200 sysctrl CRG */ + +#define HI3798CV200_SYSCTRL_NR_CLKS 16 + +static const struct hisi_gate_clock hi3798cv200_sysctrl_gate_clks[] = { + { IR_CLK, "clk_ir", "100m", + CLK_SET_RATE_PARENT, 0x48, 4, 0, }, + { TIMER01_CLK, "clk_timer01", "24m", + CLK_SET_RATE_PARENT, 0x48, 6, 0, }, + { UART0_CLK, "clk_uart0", "75m", + CLK_SET_RATE_PARENT, 0x48, 10, 0, }, +}; + +static struct hisi_clock_data *hi3798cv200_sysctrl_clk_register( + struct platform_device *pdev) +{ + struct hisi_clock_data *clk_data; + int ret; + + clk_data = hisi_clk_alloc(pdev, HI3798CV200_SYSCTRL_NR_CLKS); + if (!clk_data) + return ERR_PTR(-ENOMEM); + + ret = hisi_clk_register_gate(hi3798cv200_sysctrl_gate_clks, + ARRAY_SIZE(hi3798cv200_sysctrl_gate_clks), + clk_data); + if (ret) + return ERR_PTR(ret); + + ret = of_clk_add_provider(pdev->dev.of_node, + of_clk_src_onecell_get, &clk_data->clk_data); + if (ret) + goto unregister_gate; + + return clk_data; + +unregister_gate: + hisi_clk_unregister_gate(hi3798cv200_sysctrl_gate_clks, + ARRAY_SIZE(hi3798cv200_sysctrl_gate_clks), + clk_data); + return ERR_PTR(ret); +} + +static void hi3798cv200_sysctrl_clk_unregister(struct platform_device *pdev) +{ + struct hisi_crg_dev *crg = platform_get_drvdata(pdev); + + of_clk_del_provider(pdev->dev.of_node); + + hisi_clk_unregister_gate(hi3798cv200_sysctrl_gate_clks, + ARRAY_SIZE(hi3798cv200_sysctrl_gate_clks), + crg->clk_data); +} + +static struct hisi_crg_funcs hi3798cv200_sysctrl_funcs = { + .register_clks = hi3798cv200_sysctrl_clk_register, + .unregister_clks = hi3798cv200_sysctrl_clk_unregister, +}; + +static const struct of_device_id hi3798cv200_crg_match_table[] = { + { .compatible = "hisilicon,hi3798cv200-crg", + .data = &hi3798cv200_crg_funcs}, + { .compatible = "hisilicon,hi3798cv200-sysctrl", + .data = &hi3798cv200_sysctrl_funcs}, + { } +}; +MODULE_DEVICE_TABLE(of, hi3798cv200_clk_match_table); + +static int hi3798cv200_crg_probe(struct platform_device *pdev) +{ + struct hisi_crg_dev *crg; + const struct of_device_id *match; + + crg = devm_kmalloc(&pdev->dev, sizeof(*crg), GFP_KERNEL); + if (!crg) + return -ENOMEM; + + match = of_match_node(hi3798cv200_crg_match_table, pdev->dev.of_node); + crg->funcs = (struct hisi_crg_funcs *)match->data; + + crg->rstc = hisi_reset_init(pdev); + if (!crg->rstc) + return -ENOMEM; + + crg->clk_data = crg->funcs->register_clks(pdev); + if (IS_ERR(crg->clk_data)) { + hisi_reset_exit(crg->rstc); + return PTR_ERR(crg->clk_data); + } + + platform_set_drvdata(pdev, crg); + return 0; +} + +static int hi3798cv200_crg_remove(struct platform_device *pdev) +{ + struct hisi_crg_dev *crg = platform_get_drvdata(pdev); + + hisi_reset_exit(crg->rstc); + crg->funcs->unregister_clks(pdev); + return 0; +} + +static struct platform_driver hi3798cv200_crg_driver = { + .probe = hi3798cv200_crg_probe, + .remove = hi3798cv200_crg_remove, + .driver = { + .name = "hi3798cv200-crg", + .of_match_table = hi3798cv200_crg_match_table, + }, +}; + +static int __init hi3798cv200_crg_init(void) +{ + return platform_driver_register(&hi3798cv200_crg_driver); +} +core_initcall(hi3798cv200_crg_init); + +static void __exit hi3798cv200_crg_exit(void) +{ + platform_driver_unregister(&hi3798cv200_crg_driver); +} +module_exit(hi3798cv200_crg_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("HiSilicon Hi3798CV200 CRG Driver"); diff --git a/drivers/clk/hisilicon/crg.h b/drivers/clk/hisilicon/crg.h new file mode 100644 index 0000000..145b929 --- /dev/null +++ b/drivers/clk/hisilicon/crg.h @@ -0,0 +1,39 @@ +/* + * HiSilicon Clock and Reset Driver Header + * + * Copyright (c) 2016 HiSilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#ifndef __HISI_CRG_H +#define __HISI_CRG_H + +struct hisi_clock_data; +struct hisi_reset_controller; + +struct hisi_crg_funcs { + struct hisi_clock_data* (*register_clks)(struct platform_device *pdev); + void (*unregister_clks)(struct platform_device *pdev); +}; + +struct hisi_crg_dev { + struct hisi_clock_data *clk_data; + struct hisi_reset_controller *rstc; + struct hisi_crg_funcs *funcs; +}; + +#endif /* __HISI_CRG_H */ diff --git a/include/dt-bindings/clock/histb-clock.h b/include/dt-bindings/clock/histb-clock.h new file mode 100644 index 0000000..7f23298 --- /dev/null +++ b/include/dt-bindings/clock/histb-clock.h @@ -0,0 +1,64 @@ +/* + * Copyright (c) 2016 HiSilicon Technologies Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __DTS_HISTB_CLOCK_H +#define __DTS_HISTB_CLOCK_H + +/* clocks provided by core CRG */ +#define OSC_CLK 0 +#define APB_CLK 1 +#define AHB_CLK 2 +#define UART1_CLK 3 +#define UART2_CLK 4 +#define UART3_CLK 5 +#define I2C0_CLK 6 +#define I2C1_CLK 7 +#define I2C2_CLK 8 +#define I2C3_CLK 9 +#define I2C4_CLK 10 +#define I2C5_CLK 11 +#define SPI0_CLK 12 +#define SPI1_CLK 13 +#define SPI2_CLK 14 +#define SCI_CLK 15 +#define FMC_CLK 16 +#define MMC_BIU_CLK 17 +#define MMC_CIU_CLK 18 +#define MMC_DRV_CLK 19 +#define MMC_SAMPLE_CLK 20 +#define SDIO0_BIU_CLK 21 +#define SDIO0_CIU_CLK 22 +#define SDIO0_DRV_CLK 23 +#define SDIO0_SAMPLE_CLK 24 +#define PCIE_AUX_CLK 25 +#define PCIE_PIPE_CLK 26 +#define PCIE_SYS_CLK 27 +#define PCIE_BUS_CLK 28 +#define ETH0_MAC_CLK 29 +#define ETH0_MACIF_CLK 30 +#define ETH1_MAC_CLK 31 +#define ETH1_MACIF_CLK 32 + +/* clocks provided by mcu CRG */ +#define MCE_CLK 1 +#define IR_CLK 2 +#define TIMER01_CLK 3 +#define LEDC_CLK 4 +#define UART0_CLK 5 +#define LSADC_CLK 6 + +#endif /* __DTS_HISTB_CLOCK_H */ -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html