Am Samstag, 10. September 2016, 12:03:38 CEST schrieb Heiko Stuebner: > Am Samstag, 10. September 2016, 17:01:34 CEST schrieb Andy Yan: > > PX3 board is designed by Rockchip for automotive field, > > which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI > > video input/output interface, WIFI/BT/GPS(on a module > > named S500 which based on MT6620), Gsensor BMA250E and > > light&proximity sensor STK3410. > > > > Signed-off-by: Andy Yan <andy.yan@xxxxxxxxxxxxxx> > > [...] > > > diff --git a/arch/arm/boot/dts/rk3188-px3.dts > > b/arch/arm/boot/dts/rk3188-px3.dts new file mode 100644 > > index 0000000..ece45d7 > > --- /dev/null > > +++ b/arch/arm/boot/dts/rk3188-px3.dts > > @@ -0,0 +1,337 @@ > > +/* > > + * Copyright (c) 2016 Andy Yan <andy.yan@xxxxxxxxxxxxxx> > > + * > > + * This file is dual-licensed: you can use it either under the terms > > + * of the GPL or the X11 license, at your option. Note that this dual > > + * licensing only applies to this file, and not this project as a > > + * whole. > > + * > > + * a) This file is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU General Public License as > > + * published by the Free Software Foundation; either version 2 of the > > + * License, or (at your option) any later version. > > + * > > + * This file is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + * > > + * Or, alternatively, > > + * > > + * b) Permission is hereby granted, free of charge, to any person > > + * obtaining a copy of this software and associated documentation > > + * files (the "Software"), to deal in the Software without > > + * restriction, including without limitation the rights to use, > > + * copy, modify, merge, publish, distribute, sublicense, and/or > > + * sell copies of the Software, and to permit persons to whom the > > + * Software is furnished to do so, subject to the following > > + * conditions: > > + * > > + * The above copyright notice and this permission notice shall be > > + * included in all copies or substantial portions of the Software. > > + * > > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > > + * OTHER DEALINGS IN THE SOFTWARE. > > + */ > > + > > +/dts-v1/; > > +#include <dt-bindings/input/input.h> > > +#include "rk3188.dtsi" > > + > > +/ { > > + model = "Rockchip PX3"; > > + compatible = "rockchip,px3", "rockchip,rk3188"; > > + > > + chosen { > > + bootargs = "console=ttyS2,115200 earlyprintk"; > > + }; > > setting bootargs isn't favoured, you can instead use > stdout-path = "serial2:115200n8"; > > to define the default console > > > +&i2c0 { > > + status = "okay"; > > + > > + /* Accelerometer */ > > + bma250@18 { > > + compatible = "bma250"; > > + reg = <0x18>; > > + interrupt-parent = <&gpio0>; > > + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; > > + }; > > driver seems to be missing a devicetree binding (module_id_table > and dt-binding document) found it, should be bosch,bma250 according to Documentation/devicetree/bindings/iio/accel/bma180.txt -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html