Re: [PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




e<#secure method=pgpmime mode=sign>
Gerd Hoffmann <kraxel@xxxxxxxxxx> writes:

>   Hi,
>
>> According to this page [1] the pinctrl group for parallel display interface is
>> missing. Is it intended?
>> 
>> [1] - http://elinux.org/RPi_BCM2835_GPIOs
>
> Just an oversight I guess.  Eric?
>
> Does this look correct?
>
> +                       dpi_gpio4: dpi_gpio4 {
> +                               brcm,pins = <4 5 6 7 8 9 10 11 12 13
> +                                            14 15 16 17 18 19 20 21
> +                                            22 23 24 25 26 27>;
> +                               brcm,function = <BCM2835_FSEL_ALT2>;
> +                       };

For DPI, you also need pins 0-3 in there for clock and syncs.

That set of data pins would be for a 24-bit mode, which is what we
should be using for the Adafruit kippah + 7" panel combo.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux