This patch adds documentation for Device-Tree bindings for the Allwinner sun8i-emac driver. Signed-off-by: Corentin Labbe <clabbe.montjoie@xxxxxxxxx> --- .../bindings/net/allwinner,sun8i-emac.txt | 64 ++++++++++++++++++++++ 1 file changed, 64 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt new file mode 100644 index 0000000..4968ee3 --- /dev/null +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt @@ -0,0 +1,64 @@ +* Allwinner sun8i EMAC ethernet controller + +Required properties: +- compatible: should be one of the following string: + "allwinner,sun8i-a83t-emac" + "allwinner,sun8i-h3-emac" + "allwinner,sun50i-a64-emac" +- reg: address and length of the register for the device. +- reg-names: should be "emac" +- syscon: A phandle to the syscon of the SoC +- interrupts: interrupt for the device +- clocks: A phandle to the reference clock for this device +- clock-names: should be "ahb" +- resets: A phandle to the reset control for this device +- reset-names: should be "ahb" +- phy-mode: See ethernet.txt +- phy or phy-handle: See ethernet.txt +- #address-cells: shall be 1 +- #size-cells: shall be 0 + +"allwinner,sun8i-h3-emac" also requires: +- clocks: an extra phandle to the reference clock for the EPHY +- clock-names: an extra "ephy" entry matching the clocks property +- resets: an extra phandle to the reset control for the EPHY +- resets-names: an extra "ephy" entry matching the resets property + +See ethernet.txt in the same directory for generic bindings for ethernet +controllers. + +The device node referenced by "phy" or "phy-handle" should be a child node +of this node. See phy.txt for the generic PHY bindings. + +Optional properties: +- allwinner,tx-delay: TX clock delay chain value. Range value is 0-0x07. Default is 0) +- allwinner,rx-delay: RX clock delay chain value. Range value is 0-0x1F. Default is 0) + +The TX/RX clock delay chain settings are board specific. + +Optional properties for "allwinner,sun8i-h3-emac": +- allwinner,leds-active-low: EPHY LEDs are active low + +Example: + +emac: ethernet@01c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + reg-names = "emac"; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_EMAC>, <<&ccu RST_BUS_EPHY>; + reset-names = "ahb", "ephy"; + clocks = <&ccu CLK_BUS_EMAC>, <&ccu CLK_BUS_EPHY>; + clock-names = "ahb", "ephy"; + #address-cells = <1>; + #size-cells = <0>; + + phy = <&phy1>; + phy-mode = "mii"; + allwinner,leds-active-low; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; -- 2.7.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html