If we cannot get dr_mode or no id gpio is specified simply assume peripheral mode, as this is always safe. Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- Changes in v2: -Keep sun4i_usb_phy0_get_id_det() logic as is rather then re-ordering the switch-case Changes in v3: -No changes --- drivers/phy/phy-sun4i-usb.c | 42 ++++++++++++++---------------------------- 1 file changed, 14 insertions(+), 28 deletions(-) diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index 02cb65e..fb2d4f3 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -124,7 +124,6 @@ struct sun4i_usb_phy_data { bool regulator_on; int index; } phys[MAX_PHYS]; - int first_phy; /* phy0 / otg related variables */ struct extcon_dev *extcon; bool phy0_init; @@ -326,7 +325,10 @@ static int sun4i_usb_phy0_get_id_det(struct sun4i_usb_phy_data *data) { switch (data->dr_mode) { case USB_DR_MODE_OTG: - return gpiod_get_value_cansleep(data->id_det_gpio); + if (data->id_det_gpio) + return gpiod_get_value_cansleep(data->id_det_gpio); + else + return 1; /* Fallback to peripheral mode */ case USB_DR_MODE_HOST: return 0; case USB_DR_MODE_PERIPHERAL: @@ -539,8 +541,7 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev, { struct sun4i_usb_phy_data *data = dev_get_drvdata(dev); - if (args->args[0] < data->first_phy || - args->args[0] >= data->cfg->num_phys) + if (args->args[0] >= data->cfg->num_phys) return ERR_PTR(-ENODEV); return data->phys[args->args[0]].phy; @@ -615,33 +616,18 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) } data->dr_mode = of_usb_get_dr_mode_by_phy(np, 0); - switch (data->dr_mode) { - case USB_DR_MODE_OTG: - /* otg without id_det makes no sense, and is not supported */ - if (!data->id_det_gpio) { - dev_err(dev, "usb0_id_det missing or invalid\n"); - return -ENODEV; - } - /* fall through */ - case USB_DR_MODE_HOST: - case USB_DR_MODE_PERIPHERAL: - data->extcon = devm_extcon_dev_allocate(dev, - sun4i_usb_phy0_cable); - if (IS_ERR(data->extcon)) - return PTR_ERR(data->extcon); - ret = devm_extcon_dev_register(dev, data->extcon); - if (ret) { - dev_err(dev, "failed to register extcon: %d\n", ret); - return ret; - } - break; - default: - dev_info(dev, "dr_mode unknown, not registering usb phy0\n"); - data->first_phy = 1; + data->extcon = devm_extcon_dev_allocate(dev, sun4i_usb_phy0_cable); + if (IS_ERR(data->extcon)) + return PTR_ERR(data->extcon); + + ret = devm_extcon_dev_register(dev, data->extcon); + if (ret) { + dev_err(dev, "failed to register extcon: %d\n", ret); + return ret; } - for (i = data->first_phy; i < data->cfg->num_phys; i++) { + for (i = 0; i < data->cfg->num_phys; i++) { struct sun4i_usb_phy *phy = data->phys + i; char name[16]; -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html