From: Jorik Jonker <jorik@xxxxxxxxxxxxxx> Although these peripherals are disabled, they are associated to the pinmux definitions. Again, these are the full pinmux defs which include RTS/CTS. One could narrow this down to RX/TX only in a board specific DTS. Signed-off-by: Jorik Jonker <jorik@xxxxxxxxxxxxxx> --- arch/arm/boot/dts/sun8i-h3.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 5cde54c..e9528d1 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -443,6 +443,8 @@ resets = <&ccu RST_BUS_UART2>; dmas = <&dma 8>, <&dma 8>; dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_rts_cts_pins>; status = "disabled"; }; @@ -456,6 +458,8 @@ resets = <&ccu RST_BUS_UART3>; dmas = <&dma 9>, <&dma 9>; dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_rts_cts_pins>; status = "disabled"; }; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
