On Tue, Sep 6, 2016 at 2:15 PM, hl <hl@xxxxxxxxxxxxxx> wrote:
> Hi Sean,
>
>
> On 2016年09月07日 01:18, Sean Paul wrote:
>>
>> On Mon, Sep 5, 2016 at 1:06 AM, Lin Huang <hl@xxxxxxxxxxxxxx> wrote:
>>>
>>> when in ddr frequency scaling process, vop can not do enable or
>>> disable operation, since in dcf we check vop clock to see whether
>>> vop work. If vop work, dcf do ddr frequency scaling when vop
>>> in vblank status, and we need to read vop register to check whether
>>> vop go into vblank status. If vop not work, dcf can do ddr frequency
>>> any time. So when do ddr frequency scaling, you disabled or enable
>>> vop, there may two bad thing happen: 1, the panel flicker(when vop from
>>> disable status change to enable). 2, kernel hang (when vop from enable
>>> status change to disable, dcf need to read vblank status, but if you
>>> disable
>>> vop clock, it can not get the status, it will lead soc dead) So we need
>>> register to devfreq notifier, and we can get the dmc status. Also, when
>>> there have two vop enabled, we need to disable dmc, since dcf only base
>>> on one vop vblank time, so the other panel will flicker when do ddr
>>> frequency scaling.
>>>
>>> Signed-off-by: Lin Huang <hl@xxxxxxxxxxxxxx>
>>> Reviewed-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
>>> ---
>>> Changes in v10:
>>> - None
>>>
>>> Changes in v9:
>>> - None
>>>
>>> Changes in v8:
>>> - None
>>>
>>> Changes in v7:
>>> - None
>>>
>>> Changes in v6:
>>> - fix a build error
>>>
>>> Changes in v5:
>>> - improve some nits
>>>
>>> Changes in v4:
>>> - register notifier to devfreq_register_notifier
>>> - use DEVFREQ_PRECHANGE and DEVFREQ_POSTCHANGE to get dmc status
>>> - when two vop enable, disable dmc
>>> - when two vop back to one vop, enable dmc
>>>
>>> Changes in v3:
>>> - when do vop eanble/disable, dmc will wait until it finish
>>>
>>> Changes in v2:
>>> - None
>>>
>>> Changes in v1:
>>> - use wait_event instead usleep
>>>
>>> drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 116
>>> ++++++++++++++++++++++++++++
>>> 1 file changed, 116 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
>>> b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
>>> index efbc41a..a73f3aa 100644
>>> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
>>> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
>>> @@ -19,6 +19,8 @@
>>> #include <drm/drm_crtc_helper.h>
>>> #include <drm/drm_plane_helper.h>
>>>
>>> +#include <linux/devfreq.h>
>>> +#include <linux/devfreq-event.h>
>>> #include <linux/kernel.h>
>>> #include <linux/module.h>
>>> #include <linux/platform_device.h>
>>> @@ -118,6 +120,13 @@ struct vop {
>>>
>>> const struct vop_data *data;
>>>
>>> + struct devfreq *devfreq;
>>> + struct devfreq_event_dev *devfreq_event_dev;
>>> + struct notifier_block dmc_nb;
>>> + int dmc_in_process;
>>> + int vop_switch_status;
>>> + wait_queue_head_t wait_dmc_queue;
>>> + wait_queue_head_t wait_vop_switch_queue;
>>> uint32_t *regsbak;
>>> void __iomem *regs;
>>>
>>> @@ -428,11 +437,47 @@ static void vop_dsp_hold_valid_irq_disable(struct
>>> vop *vop)
>>> spin_unlock_irqrestore(&vop->irq_lock, flags);
>>> }
>>>
>>> +static int dmc_notify(struct notifier_block *nb, unsigned long event,
>>> + void *data)
>>> +{
>>> + struct vop *vop = container_of(nb, struct vop, dmc_nb);
>>> +
>>> + if (event == DEVFREQ_PRECHANGE) {
>>> + /*
>>> + * check if vop in enable or disable process,
>>> + * if yes, wait until it finishes, use 200ms as
>>> + * timeout.
>>> + */
>>> + if (!wait_event_timeout(vop->wait_vop_switch_queue,
>>> + !vop->vop_switch_status, HZ / 5))
>>> + dev_warn(vop->dev,
>>> + "Timeout waiting for vop swtich
>>> status\n");
>>> + vop->dmc_in_process = 1;
>>> + } else if (event == DEVFREQ_POSTCHANGE) {
>>> + vop->dmc_in_process = 0;
>>> + wake_up(&vop->wait_dmc_queue);
>>> + }
>>> +
>>> + return NOTIFY_OK;
>>> +}
>>> +
>>> static int vop_enable(struct drm_crtc *crtc)
>>> {
>>> struct vop *vop = to_vop(crtc);
>>> + int num_enabled_crtc = 0;
>>> int ret;
>>>
>>> + /*
>>> + * if in dmc scaling frequency process, wait until it finishes
>>> + * use 200ms as timeout time.
>>> + */
>>> + if (!wait_event_timeout(vop->wait_dmc_queue,
>>> + !vop->dmc_in_process, HZ / 5))
>>> + dev_warn(vop->dev,
>>> + "Timeout waiting for dmc when vop enable\n");
>>> +
>>
>>
>> This wait_event_timeout code is terribly racey (same goes above and
>> below).
>
> No i use the vop_switch_status and dmc_in_progress to handle the vop and
> dmc racey,
So what happens if dmc_in_progress becomes 1 right here, or anywhere
during vop_enable()?
Sean
> I assume this can fix the racey now. I do not better a idea now.
>>
>>
>>
>>> + vop->vop_switch_status = 1;
>>> +
>>> ret = pm_runtime_get_sync(vop->dev);
>>> if (ret < 0) {
>>> dev_err(vop->dev, "failed to get pm runtime: %d\n",
>>> ret);
>>> @@ -479,6 +524,21 @@ static int vop_enable(struct drm_crtc *crtc)
>>>
>>> drm_crtc_vblank_on(crtc);
>>>
>>> + vop->vop_switch_status = 0;
>>> + wake_up(&vop->wait_vop_switch_queue);
>>> +
>>> + /* check how many VOPs in use now */
>>> + drm_for_each_crtc(crtc, vop->drm_dev) {
>>> + if (crtc->state->enable)
>>
>> I think you really want to check active, instead of enable.
>
> Okay, i will check it, thanks.
>
>>
>>> + num_enabled_crtc++;
>>> + }
>>> +
>>> + /* if enable two vop, need to disable dmc */
>>> + if ((num_enabled_crtc > 1) && vop->devfreq) {
>>> + if (vop->devfreq_event_dev)
>>> +
>>> devfreq_event_disable_edev(vop->devfreq_event_dev);
>>> + devfreq_suspend_device(vop->devfreq);
>>> + }
>>
>> This really feels like something that should be handled somewhere
>> else. I don't fully understand how this works, but it seems like this
>> dependency should be handled where it actually matters, rather than
>> building in a seemingly arbitrary restriction in the vop driver.
>>
>> Even if this is the best place for it, this needs to be refactored to
>> eliminate the races that exist now.
>>
>> Sean
>>
>>> return 0;
>>>
>>> err_disable_aclk:
>>> @@ -489,17 +549,31 @@ err_disable_hclk:
>>> clk_disable(vop->hclk);
>>> err_put_pm_runtime:
>>> pm_runtime_put_sync(vop->dev);
>>> + vop->vop_switch_status = 0;
>>> + wake_up(&vop->wait_vop_switch_queue);
>>> return ret;
>>> }
>>>
>>> static void vop_crtc_disable(struct drm_crtc *crtc)
>>> {
>>> struct vop *vop = to_vop(crtc);
>>> + int num_enabled_crtc = 0;
>>> int i;
>>>
>>> WARN_ON(vop->event);
>>>
>>> /*
>>> + * if in dmc scaling frequency process, wait until it finish
>>> + * use 200ms as timeout time.
>>> + */
>>> + if (!wait_event_timeout(vop->wait_dmc_queue,
>>> + !vop->dmc_in_process, HZ / 5))
>>> + dev_warn(vop->dev,
>>> + "Timeout waiting for dmc when vop disable\n");
>>> +
>>> + vop->vop_switch_status = 1;
>>> +
>>> + /*
>>> * We need to make sure that all windows are disabled before we
>>> * disable that crtc. Otherwise we might try to scan from a
>>> destroyed
>>> * buffer later.
>>> @@ -555,6 +629,24 @@ static void vop_crtc_disable(struct drm_crtc *crtc)
>>> spin_unlock_irq(&crtc->dev->event_lock);
>>>
>>> crtc->state->event = NULL;
>>> +
>>> + vop->vop_switch_status = 0;
>>> + wake_up(&vop->wait_vop_switch_queue);
>>> +
>>> + /* check how many VOPs in use now */
>>> + drm_for_each_crtc(crtc, vop->drm_dev) {
>>> + if (crtc->state->enable)
>>> + num_enabled_crtc++;
>>> + }
>>> +
>>> + /*
>>> + * if num_enabled_crtc = 1 now, it means 2 vop enabled
>>> + * change to 1 vop enabled need to enable dmc again.
>>> + */
>>> + if ((num_enabled_crtc == 1) && vop->devfreq) {
>>> + if (vop->devfreq_event_dev)
>>> +
>>> devfreq_event_enable_edev(vop->devfreq_event_dev);
>>> + devfreq_resume_device(vop->devfreq);
>>> }
>>> }
>>>
>>> @@ -1413,6 +1505,8 @@ static int vop_bind(struct device *dev, struct
>>> device *master, void *data)
>>> struct drm_device *drm_dev = data;
>>> struct vop *vop;
>>> struct resource *res;
>>> + struct devfreq *devfreq;
>>> + struct devfreq_event_dev *event_dev;
>>> size_t alloc_size;
>>> int ret, irq;
>>>
>>> @@ -1474,6 +1568,28 @@ static int vop_bind(struct device *dev, struct
>>> device *master, void *data)
>>> return ret;
>>>
>>> pm_runtime_enable(&pdev->dev);
>>> +
>>> + init_waitqueue_head(&vop->wait_vop_switch_queue);
>>> + vop->vop_switch_status = 0;
>>> + init_waitqueue_head(&vop->wait_dmc_queue);
>>> + vop->dmc_in_process = 0;
>>> +
>>> + devfreq = devfreq_get_devfreq_by_phandle(dev, 0);
>>> + if (IS_ERR(devfreq))
>>> + goto out;
>>> +
>>> + vop->devfreq = devfreq;
>>> + vop->dmc_nb.notifier_call = dmc_notify;
>>> + devfreq_register_notifier(vop->devfreq, &vop->dmc_nb,
>>> + DEVFREQ_TRANSITION_NOTIFIER);
>>> +
>>> + event_dev =
>>> devfreq_event_get_edev_by_phandle(vop->devfreq->dev.parent,
>>> + 0);
>>> + if (IS_ERR(event_dev))
>>> + goto out;
>>> +
>>> + vop->devfreq_event_dev = event_dev;
>>> +out:
>>> return 0;
>>> }
>>>
>>> --
>>> 2.6.6
>>>
>>
>>
>
> --
> Lin Huang
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
