Document the ir-spi driver's binding which is a IR led driven
through the SPI line.
Signed-off-by: Andi Shyti <andi.shyti@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/media/spi-ir.txt | 26 ++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/spi-ir.txt
diff --git a/Documentation/devicetree/bindings/media/spi-ir.txt b/Documentation/devicetree/bindings/media/spi-ir.txt
new file mode 100644
index 0000000..85cb21b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/spi-ir.txt
@@ -0,0 +1,26 @@
+Device tree bindings for IR LED connected through SPI bus which is used as
+remote controller.
+
+The IR LED switch is connected to the MOSI line of the SPI device and the data
+are delivered thourgh that.
+
+Required properties:
+ - compatible: should be "ir-spi".
+
+Optional properties:
+ - irled,switch: specifies the gpio switch which enables the irled/
+ - negated: boolean value that specifies whether the output is negated
+ with a NOT gate.
+ - duty-cycle: 8 bit value that stores the percentage of the duty cycle.
+ it can be 50, 60, 70, 75, 80 or 90.
+
+Example:
+
+ irled@0 {
+ compatible = "ir-spi";
+ reg = <0x0>;
+ spi-max-frequency = <5000000>;
+ irled,switch = <&gpr3 3 0>;
+ negated;
+ duty-cycle = /bits/ 8 <60>;
+ };
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
