Configure the DISPLAY_FLAGS_SYNC_POSEDGE/NEGEDGE flags according to the binding document. If the syncclk-active is present in DT, configure the flags accordingly, if it is omitted it means that the SYNC edge is following the pixdata configuration. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx> CC: Rob Herring <robh+dt@xxxxxxxxxx> CC: Mark Rutland <mark.rutland@xxxxxxx> CC: devicetree@xxxxxxxxxxxxxxx --- drivers/video/of_display_timing.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/video/of_display_timing.c b/drivers/video/of_display_timing.c index 8a1076beecd3..db992c684f09 100644 --- a/drivers/video/of_display_timing.c +++ b/drivers/video/of_display_timing.c @@ -88,6 +88,15 @@ static int of_parse_display_timing(const struct device_node *np, dt->flags |= val ? DISPLAY_FLAGS_PIXDATA_POSEDGE : DISPLAY_FLAGS_PIXDATA_NEGEDGE; + if (!of_property_read_u32(np, "syncclk-active", &val)) + dt->flags |= val ? DISPLAY_FLAGS_SYNC_POSEDGE : + DISPLAY_FLAGS_SYNC_NEGEDGE; + else if (dt->flags & (DISPLAY_FLAGS_PIXDATA_POSEDGE | + DISPLAY_FLAGS_PIXDATA_NEGEDGE)) + dt->flags |= dt->flags & DISPLAY_FLAGS_PIXDATA_POSEDGE ? + DISPLAY_FLAGS_SYNC_POSEDGE : + DISPLAY_FLAGS_SYNC_NEGEDGE; + if (of_property_read_bool(np, "interlaced")) dt->flags |= DISPLAY_FLAGS_INTERLACED; if (of_property_read_bool(np, "doublescan")) -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
