On 09/01/2016 11:19 AM, Javier Martinez Canillas wrote: > Hello Krzysztof, > > On 09/01/2016 11:05 AM, Krzysztof Kozlowski wrote: >> On 09/01/2016 10:43 AM, Javier Martinez Canillas wrote: >>>>> --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts >>>>> +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts >>>>> @@ -21,6 +21,11 @@ >>>>> bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; >>>>> }; >>>>> >>>>> + memory { >>>>> + device_type = "memory"; >>>>> + reg = <0 0>; >>>>> + }; >>>> >>>> This looks okay, but the default size and address cells won't be >>>> present. Won't that be a problem? >>>> >>> >>> They will be present since at this point exynos5440.dtsi is still including >>> exynos5440.dtsi, we are just overriding the memory node with the same values >>> than skeleton.dtsi so this can be removed later in patch 7/7. >> >> I don't get it. exynos5440.dtsi does not set size/address cells in top node. >> > > Sorry, maybe I'm misunderstanding your question. The size/address cells are set > in the top node by exynos5440.dtsi including the skeleton.dtsi (since these are > set in that included dtsi). Where? Nothing in my sources... 15 / { 16 compatible = "samsung,exynos5440", "samsung,exynos5"; 17 18 interrupt-parent = <&gic>; > > IOW, scripts/dtc/dtx_diff doesn't show differences for these exynos5440 DTB > before and after $SUBJECT. Maybe these are also the default values so no differences... stating them explicitly would be useful. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html