Hi Rob,
Sorry for resending this mail, evolution mixed it up...
On Wed, 31 Aug 2016 09:43:49 -0500, Rob Herring wrote:
On Thu, Aug 25, 2016 at 10:21:00PM +0200, Karl-Heinz Schneider wrote:
This patch adds device tree documentation for the sbs-manager
Reviewed-by: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
Signed-off-by: Karl-Heinz Schneider <karl-heinz@xxxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/power/sbs,sbs-manager.txt | 53
++++++++++++++++++++++
1 file changed, 53 insertions(+)
create mode 100644
Documentation/devicetree/bindings/power/sbs,sbs-manager.txt
diff --git
a/Documentation/devicetree/bindings/power/sbs,sbs-manager.txt
b/Documentation/devicetree/bindings/power/sbs,sbs-manager.txt
new file mode 100644
index 0000000..6b1a87ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/sbs,sbs-manager.txt
@@ -0,0 +1,53 @@
+Binding for sbs-manager
+
+Required properties:
+- compatible: should be "lltc,ltc1760" or use "sbs,sbs-manager" as
fallback.
+- reg: integer, i2c address of the device. Should be <0xa>.
What happened to adding Phil's interrupt support into this? You don't
have to add the whole patch, just the binding part. The driver
support
can come later.
Phil revoked his patch. Right now it's not clear how the interrupt/gpio
solution will look like and if they will need an device tree binding at
all...
+
+From OS view the device is basically an i2c-mux used to communicate
with up to
+four smart battery devices at address 0xb. The driver actually
implements this
+behaviour. So standard i2c-mux nodes can be used to register up to
four slave
+batteries. See Documentation/devicetree/bindings/i2c/i2c-mux.txt
for more
+information on i2c-mux nodes. Channels will be numerated starting
from 1 to 4.
+
+Example:
+
+batman@0a {
drop leading 0.
OK.
+ compatible = "lltc,ltc1760";
+ reg = <0x0a>;
Will remove leading 0 at this places too.
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ battery@0b {
and here...
OK.
+ compatible = "ti,bq2060", "sbs,sbs-battery";
+ reg = <0x0b>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ battery@0b {
+ compatible = "ti,bq2060", "sbs,sbs-battery";
+ reg = <0x0b>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ battery@0b {
+ compatible = "ti,bq2060", "sbs,sbs-battery";
+ reg = <0x0b>;
+ };
+ };
+};
--
2.7.4
Thanks for review Rob.
--
Karl-Heinz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
