On Wed, 10 Aug 2016, Sylwester Nawrocki wrote: > This patch adds documentation of the DT bindings for the Samsung > Exynos SoC Low Power Audio Subsystem. > > Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx> > Acked-by: Rob Herring <robh@xxxxxxxxxx> > --- > > Changes since v5: > - none. > > Changes since v4: > - text reformatting, added VIC to the list of sub-devices, relative > paths used for the reference DT binding documentation files, added > example dts. > > Changes since v3: > - moved to Documentation/devicetree/bindings/mfd, > - added #address-cells, #size-cells, ranges as required > properties, > - added description of the IP block subnodes and links > to their binding's documentation. > > Changes since v2: > - none. > --- > .../bindings/mfd/samsung,exynos5433-lpass.txt | 70 ++++++++++++++++++++++ > 1 file changed, 70 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt Applied, thanks. > diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt > new file mode 100644 > index 0000000..c110e11 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt > @@ -0,0 +1,70 @@ > +Samsung Exynos SoC Low Power Audio Subsystem (LPASS) > + > +Required properties: > + > + - compatible : "samsung,exynos5433-lpass" > + - reg : should contain the LPASS top SFR region location > + and size > + - samsung,pmu-syscon : the phandle to the Power Management Unit node > + - #address-cells : should be 1 > + - #size-cells : should be 1 > + - ranges : must be present > + > +Each IP block of the Low Power Audio Subsystem should be specified as > +an optional sub-node. For "samsung,exynos5433-lpass" compatible this includes: > +UART, SLIMBUS, PCM, I2S, DMAC, Timers 0...4, VIC, WDT 0...1 devices. > + > +Bindings of the sub-nodes are described in: > + ../serial/samsung_uart.txt > + ../sound/samsung-i2s.txt > + ../dma/arm-pl330.txt > + > + > +Example: > + > +audio-subsystem { > + compatible = "samsung,exynos5433-lpass"; > + reg = <0x11400000 0x100>, <0x11500000 0x08>; > + samsung,pmu-syscon = <&pmu_system_controller>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + adma: adma@11420000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x11420000 0x1000>; > + interrupts = <0 73 0>; > + clocks = <&cmu_aud CLK_ACLK_DMAC>; > + clock-names = "apb_pclk"; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + }; > + > + i2s0: i2s0@11440000 { > + compatible = "samsung,exynos7-i2s"; > + reg = <0x11440000 0x100>; > + dmas = <&adma 0 &adma 2>; > + dma-names = "tx", "rx"; > + interrupts = <0 70 0>; > + clocks = <&cmu_aud CLK_PCLK_AUD_I2S>, > + <&cmu_aud CLK_SCLK_AUD_I2S>, > + <&cmu_aud CLK_SCLK_I2S_BCLK>; > + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; > + pinctrl-names = "default"; > + pinctrl-0 = <&i2s0_bus>; > + status = "disabled"; > + }; > + > + serial_3: serial@11460000 { > + compatible = "samsung,exynos5433-uart"; > + reg = <0x11460000 0x100>; > + interrupts = <0 67 0>; > + clocks = <&cmu_aud CLK_PCLK_AUD_UART>, > + <&cmu_aud CLK_SCLK_AUD_UART>; > + clock-names = "uart", "clk_uart_baud0"; > + pinctrl-names = "default"; > + pinctrl-0 = <&uart_aud_bus>; > + status = "disabled"; > + }; > + }; -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html