Re: [PATCH v4] ARM: dts: exynos: Enable HDMI for Arndale Octa board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 08/31/2016 08:54 AM, Andrzej Hajda wrote:
> On 08/31/2016 08:08 AM, Milo Kim wrote:
>> * GPIO for HDMI hot plug detect
>>   GPX3_7 is used. The HPD awareness is done when the GPIO is active high.
>>
>> * Enable HDMI block in Exynos5420
>>   HDMI VDD and PLL consume 1.0V LDO6 (PVDD_ANAIP_1V0) and HDMI oscillator
>>   requires 1.8V LDO7 (PVDD_ANAIP_1V8).
>>
>> * Support HDMI display data channel
>>   I2C #2 is assigned for the HDMI DDC. It enables the EDID access.
>>
>> Cc: Kukjin Kim <kgene@xxxxxxxxxx>
>> Cc: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
>> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
>> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
>> Cc: linux-samsung-soc@xxxxxxxxxxxxxxx
>> Cc: linux-kernel@xxxxxxxxxxxxxxx
>> Signed-off-by: Milo Kim <woogyom.kim@xxxxxxxxx>
> 
> Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>

Thanks, applied with Andrzej's review.

Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux