Hi all, Here's v3 of the Aspeed pinctrl and gpio driver integration patches. v2 of the integration series can be found at: https://lkml.org/lkml/2016/8/19/403 v3 captures changes required to address review comments from v2 of the driver series: https://lkml.org/lkml/2016/8/22/343 Since v2: * Add interrupt-controller property to gpio devicetree nodes * Drop unit address from pinctrl devicetree nodes * ARCH_ASPEED selects MFD_SYSCON Cheers, Andrew --- Andrew Jeffery (7): mach-aspeed: Select pinctrl drivers mach-aspeed: Select GPIO driver aspeed-g4: Add syscon and pin controller nodes palmetto: Request relevant mux functions in devicetree aspeed-g4: Add gpio controller to devicetree aspeed-g5: Add syscon and pin controller nodes aspeed-g5: Add gpio controller to devicetree arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 14 + arch/arm/boot/dts/aspeed-g4.dtsi | 430 ++++++++++++++++++++++++++ arch/arm/boot/dts/aspeed-g5.dtsi | 214 +++++++++++++ arch/arm/mach-aspeed/Kconfig | 6 + 4 files changed, 664 insertions(+) -- 2.9.3.1.g0db844e -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
