On Tue, Aug 23, 2016 at 08:52:39AM -0700, Hoan Tran wrote: > Add APM X-Gene clock binding documentation for PMD clock. > > Signed-off-by: Hoan Tran <hotran@xxxxxxx> > --- > Documentation/devicetree/bindings/clock/xgene.txt | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/Documentation/devicetree/bindings/clock/xgene.txt b/Documentation/devicetree/bindings/clock/xgene.txt > index 82f9638..c381733 100644 > --- a/Documentation/devicetree/bindings/clock/xgene.txt > +++ b/Documentation/devicetree/bindings/clock/xgene.txt > @@ -8,6 +8,7 @@ Required properties: > - compatible : shall be one of the following: > "apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock > "apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock > + "apm,xgene-pmd-clock" - for a X-Gene PMD clock > "apm,xgene-device-clock" - for a X-Gene device clock > "apm,xgene-socpll-v2-clock" - for a X-Gene SoC PLL v2 clock > "apm,xgene-pcppll-v2-clock" - for a X-Gene PCP PLL v2 clock > @@ -22,6 +23,17 @@ Required properties for SoC or PCP PLL clocks: > Optional properties for PLL clocks: > - clock-names : shall be the name of the PLL. If missing, use the device name. > > +Required properties for PMD clocks: > +- reg : shall be the physical register address for the pmd clock. > +- clocks : shall be the input parent clock phandle for the clock. > +- #clock-cells : shall be set to 1. > +- clock-output-names : shall be the name of the clock referenced by derive > + clock. > +- clock-shift: Bit shift of the clock register. Default is 0. > +- clock-width: Width of the clock register. Default is 32. > +Optional properties for PLL clocks: > +- clock-names : shall be the name of the clock. If missing, use the device name. > + > Required properties for device clocks: > - reg : shall be a list of address and length pairs describing the CSR > reset and/or the divider. Either may be omitted, but at least > @@ -59,6 +71,16 @@ For example: > type = <0>; > }; > > + pmd0clk: pmd0clk { > + compatible = "apm,xgene-pmd-clock"; > + #clock-cells = <1>; > + clocks = <&pmdpll 0>; > + reg = <0x0 0x7E200200 0x0 0x10>; > + clock-shift = <8>; > + clock-width = <3>; These should be implied by the compatible string. It's not a big deal for just adding this clock, but if you have lots more clocks to add then it is a problem. We only want leaf clocks (the ones going to devices) in DT unless there is only a few clocks. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html