Colibri modules need to be powered using the power pins 3V3 and AVDD_AUDIO. Add fixed regulators which represent this power rails. Potentially, those power rails could be switched on a carrier board. A carrier board device tree could add a own regulator with a GPIO, and reference that regulator in a vin-supply property of those new module level system regulators. This also synchronize the name of the +3.3V regulator with the one used in the Colibri VF50/VF61 device tree. Signed-off-by: Stefan Agner <stefan@xxxxxxxx> --- arch/arm/boot/dts/imx7-colibri.dtsi | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index 044b83e..06fb567 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -46,12 +46,18 @@ pwms = <&pwm1 0 5000000>; }; - reg_3p3v: regulator-3p3v { + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; - regulator-name = "3P3V"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_module_3v3_avdd: regulator-module-3v3-avdd { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AVDD_AUDIO"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-always-on; }; reg_vref_1v8: regulator-vref-1v8 { -- 2.9.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html