On Thu, Aug 25, 2016 at 11:57 PM, Archit Taneja <architt@xxxxxxxxxxxxxx> wrote:
> Hi Rob,
>
> On 06/23/2016 07:43 PM, Archit Taneja wrote:
>>
>> The MSM8916 SoC contains a MDP5 based display block, and one DSI output.
>> Add the top level MDSS DT node, and the MDP5, DSI and DSI PHY children
>> sub-blocks. Establish the link between MDP5's INTF1 output port and DSI's
>> input port.
>>
>> Cc: Andy Gross <andy.gross@xxxxxxxxxx>
>> Cc: Rob Herring <robh@xxxxxxxxxx>
>> Cc: devicetree@xxxxxxxxxxxxxxx
>
>
> Can I get an Ack on this?
I don't regularly ack the dts files and leave that to the platform
maintainers, but looks fine to me:
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Rob
>
> Thanks,
> Archit
>
>
>>
>> Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
>> ---
>> v2:
>> - Removed "qcom,dsi-host-index" and "qcom,dsi-phy-index" props
>>
>> arch/arm64/boot/dts/qcom/msm8916.dtsi | 117
>> ++++++++++++++++++++++++++++++++++
>> 1 file changed, 117 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi
>> b/arch/arm64/boot/dts/qcom/msm8916.dtsi
>> index 9681200..fe74fea 100644
>> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
>> @@ -537,6 +537,123 @@
>> clocks = <&gcc GCC_PRNG_AHB_CLK>;
>> clock-names = "core";
>> };
>> +
>> + mdss: mdss@1a00000 {
>> + compatible = "qcom,mdss";
>> + reg = <0x1a00000 0x1000>,
>> + <0x1ac8000 0x3000>;
>> + reg-names = "mdss_phys", "vbif_phys";
>> +
>> + power-domains = <&gcc MDSS_GDSC>;
>> +
>> + clocks = <&gcc GCC_MDSS_AHB_CLK>,
>> + <&gcc GCC_MDSS_AXI_CLK>,
>> + <&gcc GCC_MDSS_VSYNC_CLK>;
>> + clock-names = "iface_clk",
>> + "bus_clk",
>> + "vsync_clk";
>> +
>> + interrupts = <0 72 0>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <1>;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + mdp: mdp@1a01000 {
>> + compatible = "qcom,mdp5";
>> + reg = <0x1a01000 0x90000>;
>> + reg-names = "mdp_phys";
>> +
>> + interrupt-parent = <&mdss>;
>> + interrupts = <0 0>;
>> +
>> + clocks = <&gcc GCC_MDSS_AHB_CLK>,
>> + <&gcc GCC_MDSS_AXI_CLK>,
>> + <&gcc GCC_MDSS_MDP_CLK>,
>> + <&gcc GCC_MDSS_VSYNC_CLK>;
>> + clock-names = "iface_clk",
>> + "bus_clk",
>> + "core_clk",
>> + "vsync_clk";
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port@0 {
>> + reg = <0>;
>> + mdp5_intf1_out: endpoint {
>> + remote-endpoint =
>> <&dsi0_in>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + dsi0: dsi@1a98000 {
>> + compatible = "qcom,mdss-dsi-ctrl";
>> + reg = <0x1a98000 0x25c>;
>> + reg-names = "dsi_ctrl";
>> +
>> + interrupt-parent = <&mdss>;
>> + interrupts = <4 0>;
>> +
>> + assigned-clocks = <&gcc BYTE0_CLK_SRC>,
>> + <&gcc PCLK0_CLK_SRC>;
>> + assigned-clock-parents = <&dsi_phy0 0>,
>> + <&dsi_phy0 1>;
>> +
>> + clocks = <&gcc GCC_MDSS_MDP_CLK>,
>> + <&gcc GCC_MDSS_AHB_CLK>,
>> + <&gcc GCC_MDSS_AXI_CLK>,
>> + <&gcc GCC_MDSS_BYTE0_CLK>,
>> + <&gcc GCC_MDSS_PCLK0_CLK>,
>> + <&gcc GCC_MDSS_ESC0_CLK>;
>> + clock-names = "mdp_core_clk",
>> + "iface_clk",
>> + "bus_clk",
>> + "byte_clk",
>> + "pixel_clk",
>> + "core_clk";
>> + phys = <&dsi_phy0>;
>> + phy-names = "dsi-phy";
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port@0 {
>> + reg = <0>;
>> + dsi0_in: endpoint {
>> + remote-endpoint =
>> <&mdp5_intf1_out>;
>> + };
>> + };
>> +
>> + port@1 {
>> + reg = <1>;
>> + dsi0_out: endpoint {
>> + };
>> + };
>> + };
>> + };
>> +
>> + dsi_phy0: dsi-phy@1a98300 {
>> + compatible = "qcom,dsi-phy-28nm-lp";
>> + reg = <0x1a98300 0xd4>,
>> + <0x1a98500 0x280>,
>> + <0x1a98780 0x30>;
>> + reg-names = "dsi_pll",
>> + "dsi_phy",
>> + "dsi_phy_regulator";
>> +
>> + #clock-cells = <1>;
>> +
>> + clocks = <&gcc GCC_MDSS_AHB_CLK>;
>> + clock-names = "iface_clk";
>> + };
>> + };
>> };
>>
>> smd {
>>
>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
