Hi,
On Thu, Aug 25, 2016 at 02:57:24PM +0800, Icenowy Zheng wrote:
> >>>> diff --git a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
> >>>> index 78823d8..3ac22d4 100644
> >>>> --- a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
> >>>> +++ b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
> >>>> @@ -48,6 +48,10 @@
> >>>> model = "INet-D978 Rev 02";
> >>>> compatible = "primux,inet-d978-rev2", "allwinner,sun8i-a33";
> >>>>
> >>>> + aliases {
> >>>> + serial1 = &uart1;
> >>>> + };
> >>>> +
> >>>
> >>> Is there any other UART in the system?
> >>
> >> serial0 is defined in sun8i-reference-design-tablet.dtsi, as r_uart.
> >
> > If your board does not have r_uart pads, then the right thing to do
> > would be to disable it. You can then have uart1 as serial0.
>
> I don't know it. The RX/TX is wired on PF2/PF4 on the board (UART0 muxed with
> MMC)
Then you don't support it and you need to disable it.
> But many codes will require a ttyS0 as console... So I think the
> bluetooth should be located at ttyS1...
Most of them would use /dev/console anyway. What do you have in mind?
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Attachment:
signature.asc
Description: PGP signature
