On Tue, Aug 23, 2016 at 08:25:59AM +0200, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@xxxxxxxxxx> > > This clock is present on BCM53573 devices (including BCM47189) that use > Cortex-A7. ILP is a part of PMU (Power Management Unit) and so it should > be defined as one of its subnodes (subdevices). For more details see > Documentation entry. > > Unfortunately there isn't a set of registers related to ILP clock only. > We use registers 0x66c, 0x674 and 0x6dc and between them there are e.g. > "retention*" and "control_ext" regs. This is why this driver maps all > 0x1000 B of space. Then describe the block as a syscon which has several functions of which clocks are one. > Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx> > --- > V2: Rebase on top of clk-next > Use ALP as parent clock > Improve comments > Switch from ioremap_nocache to ioremap > Check of_clk_add_provide result for error > V3: Drop #include <linux/moduleh> > Make ILP DT entry part of PMU > Describe ILP as subdevice of PMU in Documentation > V4: Use BCM53573 name as suggested by Jon and Ray. It seems "Northstar" > (even if used in some resources) should be used in relation to > Cortex-A9 devices only. > V5: Rename remaining "ns" references to "bcm53573", sorry, I sent V4 too > early. > --- > .../bindings/clock/brcm,bcm53573-ilp.txt | 40 ++++++ Acked-by: Rob Herring <robh@xxxxxxxxxx> > drivers/clk/bcm/Makefile | 1 + > drivers/clk/bcm/clk-bcm53573-ilp.c | 146 +++++++++++++++++++++ > 3 files changed, 187 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt > create mode 100644 drivers/clk/bcm/clk-bcm53573-ilp.c > > diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt b/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt > new file mode 100644 > index 0000000..5ab3107 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt > @@ -0,0 +1,40 @@ > +Broadcom BCM53573 ILP clock > +=========================== > + > +This binding uses the common clock binding: > + Documentation/devicetree/bindings/clock/clock-bindings.txt > + > +This binding is used for ILP clock (sometimes referred as "slow clock") > +on Broadcom BCM53573 devices using Cortex-A7 CPU. > + > +This clock is part of PMU (Power Management Unit), a Broadcom's device > +handing power-related aspects. Please note PMU contains more subdevices, > +ILP is only one of them. > + > +ILP's rate has to be calculated on runtime and it depends on ALP clock > +which has to be referenced. > + > +Required properties: > +- compatible: "brcm,bcm53573-ilp" > +- reg: iomem address range of PMU (Power Management Unit) > +- reg-names: "pmu", the only needed & supported reg right now right now? Please describe all of the h/w. You don't get to change it later. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html