On Thursday 28 November 2013 11:38 PM, Sekhar Nori wrote: > On Wednesday 27 November 2013 08:01 PM, Ivan Khoronzhuk wrote: >> The problem that the set timings code contains the call of Davinci >> platform function davinci_aemif_setup_timing() which is not >> accessible if kernel is built for another platform like Keystone. >> >> The Keysone platform is going to use TI AEMIF driver. >> If TI AEMIF is used we don't need to set timings and bus width. >> It is done by AEMIF driver. >> >> To get rid of davinci-nand driver dependency on aemif platform code >> we moved aemif code to davinci platform. >> >> The platform AEMIF code (aemif.c) has to be removed once Davinci >> will be converted to DT and use ti-aemif.c driver. >> >> The long device name "davinci_ntosd2_nandflash_device" was renamed >> to "ntosd2_nandflash" as requested by Sekhar Nori, because after >> adding changes the line is so broken that its almost unreadable. >> >> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx> > > This patch can be simplified in some places. > >> --- >> v2..v1: >> - enabled AEMIF clock >> - removed EXPORT_SYMBOL(davinci_aemif_setup) >> - renamed ugly name davinci_ntosd2_nandflash_device >> >> CC: >> Sekhar Nori <nsekhar@xxxxxx> >> >> arch/arm/mach-davinci/aemif.c | 89 ++++++++++++++++++++++- >> arch/arm/mach-davinci/board-da830-evm.c | 3 + >> arch/arm/mach-davinci/board-da850-evm.c | 3 + >> arch/arm/mach-davinci/board-dm355-evm.c | 5 ++ >> arch/arm/mach-davinci/board-dm355-leopard.c | 5 ++ >> arch/arm/mach-davinci/board-dm365-evm.c | 4 + >> arch/arm/mach-davinci/board-dm644x-evm.c | 5 ++ >> arch/arm/mach-davinci/board-dm646x-evm.c | 3 + >> arch/arm/mach-davinci/board-mityomapl138.c | 3 + >> arch/arm/mach-davinci/board-neuros-osd2.c | 13 +++- >> arch/arm/mach-davinci/devices-tnetv107x.c | 3 + >> drivers/mtd/nand/davinci_nand.c | 23 ------ >> include/linux/platform_data/mtd-davinci-aemif.h | 5 +- > > Most of these boards dont really have a timing structure defined. > Instead of blindly calling AEMIF setup on all boards, it can be > done only on boards that actually need it. > Make sense to me. >> /* >> * aemif_calc_rate - calculate timing data. >> * @wanted: The cycle time needed in nanoseconds. >> @@ -86,7 +98,7 @@ static int aemif_calc_rate(int wanted, unsigned long clk, int max) >> * >> * Returns 0 on success, else negative errno. >> */ >> -int davinci_aemif_setup_timing(struct davinci_aemif_timing *t, >> +static int davinci_aemif_setup_timing(struct davinci_aemif_timing *t, > > passing the clkrate to this function helps avoid a repeated clk_get(). > I made these changes locally and here is the updated patch: > probably a good idea. > ---8<--- > From cdea7d6f753db09447fe2232959864ab999fe565 Mon Sep 17 00:00:00 2001 > From: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx> > Date: Wed, 27 Nov 2013 16:31:34 +0200 > Subject: [PATCH 1/1] ARM: davinci: aemif: get rid of davinci-nand driver > dependency on aemif > > The problem that the set timings code contains the call of Davinci > platform function davinci_aemif_setup_timing() which is not > accessible if kernel is built for another platform like Keystone. > > The Keysone platform is going to use TI AEMIF driver. > If TI AEMIF is used we don't need to set timings and bus width. > It is done by AEMIF driver. The TI AEMIF driver cannot > be used on all current DaVinci platforms since it is DT-only. > > To get rid of davinci-nand driver dependency on aemif platform code > we moved aemif code to davinci platform. > > The platform AEMIF code (aemif.c) has to be removed once Davinci > will be converted to DT and use ti-aemif.c driver. > > Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx> > Signed-off-by: Sekhar Nori <nsekhar@xxxxxx> > --- > arch/arm/mach-davinci/aemif.c | 106 ++++++++++++++++++++--- > arch/arm/mach-davinci/board-da830-evm.c | 3 + > arch/arm/mach-davinci/board-da850-evm.c | 3 + > arch/arm/mach-davinci/board-dm644x-evm.c | 5 ++ > arch/arm/mach-davinci/board-dm646x-evm.c | 3 + Ivan commented same need for board-mityomapl138.c as well. > drivers/mtd/nand/davinci_nand.c | 23 ----- > include/linux/platform_data/mtd-davinci-aemif.h | 5 +- > 7 files changed, 112 insertions(+), 36 deletions(-) > Apart from that one board question, I think the patch is nicely breaking the hard dependency with nand driver and machine code making easier for re-use. FWIW, Acked-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx> Regards, Santosh -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
