It is a hardware bug in RK3288, the only way to solve it is to reset the phy. Signed-off-by: Randy Li <ayaka@xxxxxxxxxxx> --- drivers/phy/phy-rockchip-usb.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c index 2a7381f..734987f 100644 --- a/drivers/phy/phy-rockchip-usb.c +++ b/drivers/phy/phy-rockchip-usb.c @@ -29,6 +29,7 @@ #include <linux/reset.h> #include <linux/regmap.h> #include <linux/mfd/syscon.h> +#include <linux/delay.h> static int enable_usb_uart; @@ -64,6 +65,7 @@ struct rockchip_usb_phy { struct clk_hw clk480m_hw; struct phy *phy; bool uart_enabled; + struct reset_control *reset; }; static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy, @@ -144,9 +146,23 @@ static int rockchip_usb_phy_power_on(struct phy *_phy) return clk_prepare_enable(phy->clk480m); } +static int rockchip_usb_phy_reset(struct phy *_phy) +{ + struct rockchip_usb_phy *phy = phy_get_drvdata(_phy); + + if (phy->reset) { + reset_control_assert(phy->reset); + udelay(10); + reset_control_deassert(phy->reset); + } + + return 0; +} + static const struct phy_ops ops = { .power_on = rockchip_usb_phy_power_on, .power_off = rockchip_usb_phy_power_off, + .reset = rockchip_usb_phy_reset, .owner = THIS_MODULE, }; @@ -185,6 +201,10 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base, return -EINVAL; } + rk_phy->reset = of_reset_control_get(child, "phy-reset"); + if (IS_ERR(rk_phy->reset)) + rk_phy->reset = NULL; + rk_phy->reg_offset = reg_offset; rk_phy->clk = of_clk_get_by_name(child, "phyclk"); -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html