To establish a connection between GPIO controllers and pin multiplexor
controller add gpio-ranges properties to all GPIO controllers found
on iMX50 SoC. The change was done after human parsing of output from
% gawk -n '{ sub(/.*__/, ""); if ($1 ~ "^GPIO") print $1, $2/4}' imx6ul-pinfunc.h | sort -n
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
---
arch/arm/boot/dts/imx6ul.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 33b95d78831a..1fd7f4be9d79 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -411,6 +411,9 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+
+ gpio-ranges = <&iomuxc 0 23 10>, <&iomuxc 10 17 6>,
+ <&iomuxc 16 33 16>;
};
gpio2: gpio@020a0000 {
@@ -422,6 +425,8 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+
+ gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>;
};
gpio3: gpio@020a4000 {
@@ -433,6 +438,8 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+
+ gpio-ranges = <&iomuxc 0 65 29>;
};
gpio4: gpio@020a8000 {
@@ -444,6 +451,8 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+
+ gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
};
gpio5: gpio@020ac000 {
@@ -455,6 +464,8 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+
+ gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>;
};
fec2: ethernet@020b4000 {
--
2.8.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
