Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> --- Documentation/devicetree/bindings/arm/arm,scpi.txt | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt index faa4b44..04bc171 100644 --- a/Documentation/devicetree/bindings/arm/arm,scpi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt @@ -7,7 +7,7 @@ by Linux to initiate various system control and power operations. Required properties: -- compatible : should be "arm,scpi" +- compatible : should be "arm,scpi" or "amlogic,meson-gxbb-scpi" - mboxes: List of phandle and mailbox channel specifiers All the channels reserved by remote SCP firmware for use by SCPI message protocol should be specified in any order @@ -60,7 +60,8 @@ A small area of SRAM is reserved for SCPI communication between application processors and SCP. Required properties: -- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM on Juno +- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM on Juno, + or "amlogic,meson-gxbb-sram" for Amlogic GXBB SoC. The rest of the properties should follow the generic mmio-sram description found in ../../sram/sram.txt @@ -70,7 +71,8 @@ Each sub-node represents the reserved area for SCPI. Required sub-node properties: - reg : The base offset and size of the reserved area with the SRAM - compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based - shared memory on Juno platforms + shared memory on Juno platforms or + "amlogic,meson-gxbb-scp-shmem" for Amlogic GXBB SoC. Sensor bindings for the sensors based on SCPI Message Protocol -------------------------------------------------------------- -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
