Re: [PATCH V2 RFC 1/6] usb: dwc2: core: Avoid nonsense error in gadget mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




John Youn <John.Youn@xxxxxxxxxxxx> writes:

> On 7/26/2016 11:54 AM, Stefan Wahren wrote:
>> In gadget mode On bcm2835 platform the host tx fifo size could be zero.
>> So add zero to range and avoid such nonsense errors:
>> 
>> dwc2 20980000.usb: 0 invalid for host_nperio_tx_fifo_size.
>> dwc2 20980000.usb: Setting host_nperio_tx_fifo_size to 0
>> dwc2 20980000.usb: 0 invalid for host_perio_tx_fifo_size.
>> dwc2 20980000.usb: Setting host_perio_tx_fifo_size to 0
>
> Hi Stefan,
>
> Are those the power on reset values of GNPTXFSIZ and HPTXFSIZ?
>
> If these values can be 0, I think the patch is ok. But I'm not sure
> about that. I can check with some hardware engineers to see under what
> conditions this is possible.

FWIW, I don't see the firmware software doing any conditional setting of
these registers.

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux