Re: [PATCH 5/7] arm64: dts: exynos: Add dts files for Samsung Exynos5433 64bit SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Sylwester,

On 2016년 08월 16일 19:50, Sylwester Nawrocki wrote:
> Hi Chanwoo,
> 
> On 08/16/2016 08:35 AM, Chanwoo Choi wrote:
>> This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC based on
>> Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53). And Exynos5433 supports
>> PSCI (Power State Coordination Interface) v0.1.
> 
>> ---
>>  arch/arm64/boot/dts/exynos/exynos5433.dtsi         | 1580 ++++++++++++++++++++
> 
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi 
>> b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
>> new file mode 100644
>> index 000000000000..2a5b05744533
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
>> @@ -0,0 +1,1580 @@
> 
>> +
>> +/ {
>> +	compatible = "samsung,exynos5433";
>> +	#address-cells = <2>;
>> +	#size-cells = <2>;
> 
>> +	soc: soc {
>> +		compatible = "simple-bus";
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges = <0x0 0x0 0x0 0x18000000>;
> 
>> +		lpass: lpass@11400000 {
>> +			compatible = "samsung,exynos5433-lpass";
>> +			reg = <0x11400000 0x100>;
>> +			samsung,pmu-syscon = <&pmu_system_controller>;
>> +			status = "disabled";
>> +		};
>> +
>> +		i2s0: i2s0@11440000 {
>> +			compatible = "samsung,exynos7-i2s";
>> +			reg = <0x11440000 0x100>;
>> +			dmas = <&adma 0 &adma 2>;
>> +			dma-names = "tx", "rx";
>> +			interrupts = <0 70 0>;
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
>> +				 <&cmu_aud CLK_SCLK_AUD_I2S>,
>> +				 <&cmu_aud CLK_SCLK_I2S_BCLK>;
>> +			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
>> +			pinctrl-names = "default";
>> +			pinctrl-0 = <&i2s0_bus>;
>> +			status = "disabled";
>> +		};
> 
>> +		serial_3: serial@11460000 {
>> +			compatible = "samsung,exynos5433-uart";
>> +			reg = <0x11460000 0x100>;
>> +			interrupts = <0 67 0>;
>> +			clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
>> +				<&cmu_aud CLK_SCLK_AUD_UART>;
>> +			clock-names = "uart", "clk_uart_baud0";
>> +			pinctrl-names = "default";
>> +			pinctrl-0 = <&uart_aud_bus>;
>> +			status = "disabled";
>> +		};
>> +
> 
>> +		amba {
>> +			compatible = "arm,amba-bus";
>> +			#address-cells = <1>;
>> +			#size-cells = <1>;
>> +			ranges;
> 
>> +			adma: adma@11420000 {
>> +				compatible = "arm,pl330", "arm,primecell";
>> +				reg = <0x11420000 0x1000>;
>> +				interrupts = <0 73 0>;
>> +				clocks = <&cmu_aud CLK_ACLK_DMAC>;
>> +				clock-names = "apb_pclk";
>> +				#dma-cells = <1>;
>> +				#dma-channels = <8>;
>> +				#dma-requests = <32>;
>> +			};
>> +		};
>> +	};
> 
> The latest Exynos5433 Audio Subsystem bindings look like this
> https://git.linuxtv.org/snawrocki/samsung.git/commit/?h=for-v4.9/mfd/exynos-lpass-v5&id=104cc6ad3ecc7c4c8ecf73663b93eb48b78f35aa
> i.e. adma@11420000, i2s0@11440000, serial@11460000 should be subnodes of
> the lpass@11400000 node.

OK. I'll use your latest patches for sound and then test it again.

Regards,
Chanwoo Choi

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux