One quick question: On 08/11/2016 09:06 AM, Songjun Wu wrote: > The Image Sensor Controller driver includes two parts. > 1) Driver code to implement the ISC function. > 2) Device tree binding documentation, it describes how > to add the ISC in device tree. > > Test result with v4l-utils. > # v4l2-compliance -f > v4l2-compliance SHA : not available > > Driver Info: > Driver name : atmel_isc > Card type : Atmel Image Sensor Controller > Bus info : platform:atmel_isc f0008000.isc > Driver version: 4.7.0 > Capabilities : 0x84200001 > Video Capture > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04200001 > Video Capture > Streaming > Extended Pix Format > > Compliance test for device /dev/video0 (not using libv4l2): > > Required ioctls: > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second video open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 1 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Test input 0: > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported) > test VIDIOC_QUERYCTRL: OK (Not Supported) > test VIDIOC_G/S_CTRL: OK (Not Supported) > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported) > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 Can you confirm that the sensor subdevice you are using does not have any controls? I ask since that is fairly unusual, so I want to make sure that controls are really not supported in this setup. Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
