Hi Jonas, On Aug 9, 2016, at 11:14 PM, Jonas Gorski <jonas.gorski@xxxxxxxxx> wrote: > > Hi, > > On 9 August 2016 at 03:44, Jaedon Shin <jaedon.shin@xxxxxxxxx> wrote: >> Hi Jonas, >> >> On Aug 8, 2016, at 11:06 PM, Jonas Gorski <jonas.gorski@xxxxxxxxx> wrote: >>> >>> Hi, >>> >>> please always include devicetree for any dts(i) related changes. >>> >>> On 8 August 2016 at 04:17, Jaedon Shin <jaedon.shin@xxxxxxxxx> wrote: >>>> (snip) >>>> diff --git a/arch/mips/boot/dts/brcm/bcm97435svmb.dts b/arch/mips/boot/dts/brcm/bcm97435svmb.dts >>>> index 9db84f2a6664..dd8b8fb97053 100644 >>>> --- a/arch/mips/boot/dts/brcm/bcm97435svmb.dts >>>> +++ b/arch/mips/boot/dts/brcm/bcm97435svmb.dts >>>> @@ -59,6 +59,14 @@ >>>> status = "okay"; >>>> }; >>>> >>>> +&upg_gio { >>>> + status = "okay"; >>>> +}; >>>> + >>>> +&upg_gio_aon { >>>> + status = "okay"; >>>> +}; >>>> + >>> >>> You don't set their status in the dtsi, they will be enabled by >>> default, and you can drop this change. >>> >>>> &enet0 { >>>> status = "okay"; >>>> }; >>> >>> >>> Regards >>> Jonas >> >> The status="disabled" has been missing. It will be added in v2. >> The interrupt-controller@ will also be changed. > > I thought that was indented, since GPIO controllers usually are always > present (you don't disable the irq controllers by default either). > > Not that I want to tell you how you do your dts(i) files, but I would > expect things that you usually always need (irq, clocks, gpios) are > present by default. > > > Regards > Jonas I checked the BCM7445 ARM based SoC device tree and other BRCM boards, and I agree with your point. The status="okay" nodes will be removed in v2. Thanks, Jaedon-- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html