On 11/20/2013 08:54 AM, Tarek Dakhran wrote: > On 20.11.2013 03:23, Tomasz Figa wrote: >> I've applied the patches on top of today's linux-next and tried to boot >> my ODROID-XU using exynos5410-smdk5410.dts and exynos_defconfig, but all >> I can get is an imprecise external abort, when the kernel tries to jump >> to init. Full boot log below. Any ideas? >> [ 5.195000] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 >> [ 5.210000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 >> > Tomasz, there is CCI on/off switcher on smdk5410 board, also there is > XOMCCI pin on SoC. > Looks like switcher on board controls the XOMCCI SoC pin. > > When I turn switcher OFF, I getting the same problem you got. > Please, check the cci state on Odroid-XU Board, maybe it is turned off. I've soldered a wire to the XOMCCI pin on Odroid-XU+E. When pulled to Vdd via 100k (original configuration), the fault is "imprecise external abort (0x1406)" (as above). When pulled to ground, the fault is "imprecise external abort (0x406)". This is consistently reproducible. AFAICT, from ARM reference [1]: the 5 status bits in both cases are "Asynchronous external abort." and the difference is bit 12 "external abort type:" when pulled to Vdd, caused by "AXI Slave error," when pulled to ground, caused by "AXI Decode error". Any pointers on further differences between SMDK5410 and ODROID-XU that are preventing the patch from booting? Thanks in advance. [1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0344b/Bgbiaghh.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
