[PATCH 10/20] MIPS: SEAD3: Use register-bit-led driver via DT for LEDs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Probe a driver for the PLED & FLED LEDs found on the SEAD3 board using
the register-bit-led driver via device tree, rather than a custom driver
via platform code. Enable support for the register-bit-led driver & its
prerequisite syscon in sead3_defconfig.

Signed-off-by: Paul Burton <paul.burton@xxxxxxxxxx>
---

 arch/mips/boot/dts/mti/sead3.dts     | 103 +++++++++++++++++++++++++++++++++++
 arch/mips/configs/sead3_defconfig    |   2 +
 arch/mips/mti-sead3/Makefile         |   1 -
 arch/mips/mti-sead3/sead3-platform.c |  91 -------------------------------
 4 files changed, 105 insertions(+), 92 deletions(-)
 delete mode 100644 arch/mips/mti-sead3/sead3-platform.c

diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts
index 7799826..563e2636 100644
--- a/arch/mips/boot/dts/mti/sead3.dts
+++ b/arch/mips/boot/dts/mti/sead3.dts
@@ -84,6 +84,109 @@
 		};
 	};
 
+	system-controller@1f000200 {
+		compatible = "mti,sead3-cpld", "syscon", "simple-mfd";
+		reg = <0x1f000200 0x300>;
+
+		led@10.0 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x1>;
+			label = "pled0";
+		};
+		led@10.1 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x2>;
+			label = "pled1";
+		};
+		led@10.2 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x4>;
+			label = "pled2";
+		};
+		led@10.3 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x8>;
+			label = "pled3";
+		};
+		led@10.4 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x10>;
+			label = "pled4";
+		};
+		led@10.5 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x20>;
+			label = "pled5";
+		};
+		led@10.6 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x40>;
+			label = "pled6";
+		};
+		led@10.7 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x80>;
+			label = "pled7";
+		};
+
+		led@18.0 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x1>;
+			label = "fled0";
+		};
+		led@18.1 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x2>;
+			label = "fled1";
+		};
+		led@18.2 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x4>;
+			label = "fled2";
+		};
+		led@18.3 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x8>;
+			label = "fled3";
+		};
+		led@18.4 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x10>;
+			label = "fled4";
+		};
+		led@18.5 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x20>;
+			label = "fled5";
+		};
+		led@18.6 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x40>;
+			label = "fled6";
+		};
+		led@18.7 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x80>;
+			label = "fled7";
+		};
+	};
+
 	/* UART connected to FTDI & miniUSB socket */
 	uart0: uart@1f000900 {
 		compatible = "ns16550a";
diff --git a/arch/mips/configs/sead3_defconfig b/arch/mips/configs/sead3_defconfig
index 23cce81..e1c6582 100644
--- a/arch/mips/configs/sead3_defconfig
+++ b/arch/mips/configs/sead3_defconfig
@@ -81,6 +81,7 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
 CONFIG_SPI=y
 CONFIG_SENSORS_ADT7475=y
+CONFIG_MFD_SYSCON=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
@@ -95,6 +96,7 @@ CONFIG_MMC_DEBUG=y
 CONFIG_MMC_SPI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SYSCON=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile
index a58b6d9..04ea002 100644
--- a/arch/mips/mti-sead3/Makefile
+++ b/arch/mips/mti-sead3/Makefile
@@ -13,7 +13,6 @@ obj-y += sead3-display.o
 obj-y += sead3-dtshim.o
 obj-y += sead3-init.o
 obj-y += sead3-int.o
-obj-y += sead3-platform.o
 obj-y += sead3-reset.o
 obj-y += sead3-setup.o
 obj-y += sead3-time.o
diff --git a/arch/mips/mti-sead3/sead3-platform.c b/arch/mips/mti-sead3/sead3-platform.c
deleted file mode 100644
index 5c1f42a..0000000
--- a/arch/mips/mti-sead3/sead3-platform.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
- */
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-#define LEDFLAGS(bits, shift)		\
-	((bits << 8) | (shift << 8))
-
-#define LEDBITS(id, shift, bits)	\
-	.name = id #shift,		\
-	.flags = LEDFLAGS(bits, shift)
-
-static struct led_info led_data_info[] = {
-	{ LEDBITS("bit", 0, 1) },
-	{ LEDBITS("bit", 1, 1) },
-	{ LEDBITS("bit", 2, 1) },
-	{ LEDBITS("bit", 3, 1) },
-	{ LEDBITS("bit", 4, 1) },
-	{ LEDBITS("bit", 5, 1) },
-	{ LEDBITS("bit", 6, 1) },
-	{ LEDBITS("bit", 7, 1) },
-	{ LEDBITS("all", 0, 8) },
-};
-
-static struct led_platform_data led_data = {
-	.num_leds	= ARRAY_SIZE(led_data_info),
-	.leds		= led_data_info
-};
-
-static struct resource pled_resources[] = {
-	{
-		.start	= 0x1f000210,
-		.end	= 0x1f000217,
-		.flags	= IORESOURCE_MEM
-	}
-};
-
-static struct platform_device pled_device = {
-	.name			= "sead3::pled",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= &led_data,
-	},
-	.num_resources		= ARRAY_SIZE(pled_resources),
-	.resource		= pled_resources
-};
-
-
-static struct resource fled_resources[] = {
-	{
-		.start			= 0x1f000218,
-		.end			= 0x1f00021f,
-		.flags			= IORESOURCE_MEM
-	}
-};
-
-static struct platform_device fled_device = {
-	.name			= "sead3::fled",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= &led_data,
-	},
-	.num_resources		= ARRAY_SIZE(fled_resources),
-	.resource		= fled_resources
-};
-
-static struct platform_device sead3_led_device = {
-        .name   = "sead3-led",
-        .id     = -1,
-};
-
-static struct platform_device *sead3_platform_devices[] __initdata = {
-	&pled_device,
-	&fled_device,
-	&sead3_led_device,
-};
-
-static int __init sead3_platforms_device_init(void)
-{
-	return platform_add_devices(sead3_platform_devices,
-				    ARRAY_SIZE(sead3_platform_devices));
-}
-
-device_initcall(sead3_platforms_device_init);
-- 
2.9.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux