El 2016-08-02 05:30, Peter Chen escribió:
Hi all,
This is a follow-up for my last power sequence framework patch set
[1].
According to Rob Herring and Ulf Hansson's comments[2], I use a
generic
power sequence library for parsing the power sequence elements on DT,
and implement generic power sequence on library. The host driver
can allocate power sequence instance, and calls pwrseq APIs
accordingly.
In future, if there are special power sequence requirements, the
special
power sequence library can be created.
This patch set is tested on i.mx6 sabresx evk using a dts change, I
use
two hot-plug devices to simulate this use case, the related binding
change is updated at patch [1/6], The udoo board changes were tested
using my last power sequence patch set.[3]
Except for hard-wired MMC and USB devices, I find the USB ULPI PHY
also
need to power on itself before it can be found by ULPI bus.
[1] http://www.spinics.net/lists/linux-usb/msg142755.html
[2] http://www.spinics.net/lists/linux-usb/msg143106.html
[3] http://www.spinics.net/lists/linux-usb/msg142815.html
Changes for v4:
- Create the patch on next-20160722
- Fix the of_node is not NULL after chipidea driver is unbinded
[Patch 5/6]
- Using more friendly wait method for reset gpio [Patch 2/6]
- Support multiple input clocks [Patch 2/6]
- Add Rob Herring's ack for DT changes
- Add Joshua Clayton's Tested-by
Changes for v3:
- Delete "power-sequence" property at binding-doc, and change related
code
at both library and user code.
- Change binding-doc example node name with Rob's comments
- of_get_named_gpio_flags only gets the gpio, but without setting
gpio flags,
add additional code request gpio with proper gpio flags
- Add Philipp Zabel's Ack and MAINTAINER's entry
Changes for v2:
- Delete "pwrseq" prefix and clock-names for properties at dt binding
- Should use structure not but its pointer for kzalloc
- Since chipidea core has no of_node, let core's of_node equals glue
layer's at core's probe
Peter Chen (6):
binding-doc: power: pwrseq-generic: add binding doc for generic
power
sequence library
power: add power sequence library
binding-doc: usb: usb-device: add optional properties for power
sequence
usb: core: add power sequence handling for USB devices
usb: chipidea: let chipidea core device of_node equal's glue layer
device of_node
ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB property
Hi Peter,
I tried the last version on my udoo board but I got these compile
errors:
[21330s] ERROR: "pwrseq_get" [drivers/usb/core/usbcore.ko] undefined!
[21330s] ERROR: "pwrseq_free" [drivers/usb/core/usbcore.ko] undefined!
[21330s] ERROR: "pwrseq_put" [drivers/usb/core/usbcore.ko] undefined!
[21330s] ERROR: "pwrseq_off" [drivers/usb/core/usbcore.ko] undefined!
[21330s] ERROR: "pwrseq_on" [drivers/usb/core/usbcore.ko] undefined!
Will you do another version?
Thanks!
--
Oscar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
