Hi zhuyj,
Thanks for the review...
>
> + switch (phydev->speed) {
> + case SPEED_1000:
> + val |= BMCR_SPEED1000;
> + case SPEED_100:
> + val |= BMCR_SPEED100;
> + }
>
> Are there only 2 kinds of speed?
Converter supports 3 different speeds will fix in the next version...
Thanks,
Kedar.
>
>
> On Thu, Aug 4, 2016 at 8:13 PM, Kedareswara rao Appana
> <appana.durga.rao@xxxxxxxxxx> wrote:
> > This patch adds support for gmiitorgmii converter.
> >
> > The GMII to RGMII IP core provides the Reduced Gigabit Media
> > Independent Interface (RGMII) between Ethernet physical media Devices
> > and the Gigabit Ethernet controller. This core can Switch dynamically
> > between the three different speed modes of Operation by configuring
> > the converter register through mdio write.
> >
> > MDIO interface is used to set operating speed of Ethernet MAC.
> >
> > Signed-off-by: Kedareswara rao Appana <appanad@xxxxxxxxxx>
> > ---
> > Thanks a lot Andrew for your inputs.
> > Changes for v3:
> > --> Updated the driver as suggested by Andrew.
> > Changes for v2:
> > --> Passed struct xphy pointer directly to the fix_mac_speed
> > API as suggested by the Florian.
> > --> Added checks for the phy-node fail case as suggested
> > by the Florian
> >
> > drivers/net/phy/Kconfig | 8 +++
> > drivers/net/phy/Makefile | 1 +
> > drivers/net/phy/xilinx_gmii2rgmii.c | 121
> > ++++++++++++++++++++++++++++++++++++
> > 3 files changed, 130 insertions(+)
> > create mode 100644 drivers/net/phy/xilinx_gmii2rgmii.c
> >
> > diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index
> > 6dad9a9..eec31a3 100644
> > --- a/drivers/net/phy/Kconfig
> > +++ b/drivers/net/phy/Kconfig
> > @@ -271,6 +271,14 @@ config MDIO_BCM_IPROC
> > This module provides a driver for the MDIO busses found in the
> > Broadcom iProc SoC's.
> >
> > +config XILINX_GMII2RGMII
> > + tristate "Xilinx GMII2RGMII converter driver"
> > + default y
> > + ---help---
> > + This driver support xilinx GMII to RGMII IP core it provides
> > + the Reduced Gigabit Media Independent Interface(RGMII) between
> > + Ethernet physical media devices and the Gigabit Ethernet controller.
> > +
> > endif # PHYLIB
> >
> > config MICREL_KS8995MA
> > diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index
> > fcdbb92..8650067 100644
> > --- a/drivers/net/phy/Makefile
> > +++ b/drivers/net/phy/Makefile
> > @@ -44,3 +44,4 @@ obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
> > obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
> > obj-$(CONFIG_MICROCHIP_PHY) += microchip.o
> > obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
> > +obj-$(CONFIG_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o
> > diff --git a/drivers/net/phy/xilinx_gmii2rgmii.c
> > b/drivers/net/phy/xilinx_gmii2rgmii.c
> > new file mode 100644
> > index 0000000..56a655a9
> > --- /dev/null
> > +++ b/drivers/net/phy/xilinx_gmii2rgmii.c
> > @@ -0,0 +1,121 @@
> > +/* Xilinx GMII2RGMII Converter driver
> > + *
> > + * Copyright (C) 2016 Xilinx, Inc.
> > + *
> > + * Author: Kedareswara rao Appana <appanad@xxxxxxxxxx>
> > + *
> > + * Description:
> > + * This driver is developed for Xilinx GMII2RGMII Converter
> > + *
> > + * This program is free software: you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License as published
> > +by
> > + * the Free Software Foundation, either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +#include <linux/module.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mii.h>
> > +#include <linux/mdio.h>
> > +#include <linux/phy.h>
> > +#include <linux/of_mdio.h>
> > +
> > +#define XILINX_GMII2RGMII_REG 0x10
> > +
> > +struct gmii2rgmii {
> > + struct phy_device *phy_dev;
> > + struct phy_driver *phy_drv;
> > + struct phy_driver conv_phy_drv;
> > + int addr;
> > +};
> > +
> > +static int xgmiitorgmii_read_status(struct phy_device *phydev) {
> > + struct gmii2rgmii *priv = (struct gmii2rgmii *)phydev->priv;
> > + u16 val = 0;
> > +
> > + priv->phy_drv->read_status(phydev);
> > +
> > + val = mdiobus_read(phydev->mdio.bus, priv->addr,
> > + XILINX_GMII2RGMII_REG);
> > +
> > + switch (phydev->speed) {
> > + case SPEED_1000:
> > + val |= BMCR_SPEED1000;
> > + case SPEED_100:
> > + val |= BMCR_SPEED100;
> > + }
> > +
> > + mdiobus_write(phydev->mdio.bus, priv->addr,
> > + XILINX_GMII2RGMII_REG, val);
> > +
> > + return 0;
> > +}
> > +
> > +int xgmiitorgmii_probe(struct mdio_device *mdiodev) {
> > + struct device *dev = &mdiodev->dev;
> > + struct device_node *np = dev->of_node, *phy_node;
> > + struct gmii2rgmii *priv;
> > + int ret;
> > +
> > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > + if (!priv)
> > + return -ENOMEM;
> > +
> > + phy_node = of_parse_phandle(np, "phy-handle", 0);
> > + if (IS_ERR(phy_node)) {
> > + dev_err(dev, "Couldn't parse phy-handle\n");
> > + ret = -ENODEV;
> > + goto out;
> > + }
> > +
> > + priv->phy_dev = of_phy_find_device(phy_node);
> > + if (!priv->phy_dev) {
> > + ret = -EPROBE_DEFER;
> > + dev_info(dev, "Couldn't find phydev\n");
> > + goto out;
> > + }
> > +
> > + priv->addr = mdiodev->addr;
> > + priv->phy_drv = priv->phy_dev->drv;
> > + memcpy(&priv->conv_phy_drv, priv->phy_dev->drv,
> > + sizeof(struct phy_driver));
> > + priv->conv_phy_drv.read_status = xgmiitorgmii_read_status;
> > + priv->phy_dev->priv = priv;
> > + priv->phy_dev->drv = &priv->conv_phy_drv;
> > +
> > + return 0;
> > +out:
> > + return ret;
> > +}
> > +
> > +static const struct of_device_id xgmiitorgmii_of_match[] = {
> > + { .compatible = "xilinx,gmiitorgmii" }, };
> > +MODULE_DEVICE_TABLE(of, xgmiitorgmii_of_match);
> > +
> > +static struct mdio_driver xgmiitorgmii_driver = {
> > + .probe = xgmiitorgmii_probe,
> > + .mdiodrv.driver = {
> > + .name = "xgmiitorgmii",
> > + .of_match_table = xgmiitorgmii_of_match,
> > + },
> > +};
> > +
> > +static int __init xgmiitorgmii_init(void) {
> > + return mdio_driver_register(&xgmiitorgmii_driver);
> > +}
> > +module_init(xgmiitorgmii_init);
> > +
> > +static void __exit xgmiitorgmii_cleanup(void) {
> > + mdio_driver_unregister(&xgmiitorgmii_driver);
> > +}
> > +module_exit(xgmiitorgmii_cleanup);
> > +
> > +MODULE_DESCRIPTION("Xilinx GMII2RGMII converter driver");
> > +MODULE_LICENSE("GPL");
> > --
> > 2.1.2
> >
��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
