In order to use sdma with UART, we need to add DMA configuration in device tree. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxxxx> --- arch/arm/boot/dts/imx53.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index cd17037..de545e2 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -217,6 +217,8 @@ clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, <&clks IMX5_CLK_UART3_PER_GATE>; clock-names = "ipg", "per"; + dmas = <&sdma 42 4 0>, <&sdma 43 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -508,6 +510,8 @@ clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, <&clks IMX5_CLK_UART2_PER_GATE>; clock-names = "ipg", "per"; + dmas = <&sdma 12 4 0>, <&sdma 13 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -591,6 +595,8 @@ clocks = <&clks IMX5_CLK_UART4_IPG_GATE>, <&clks IMX5_CLK_UART4_PER_GATE>; clock-names = "ipg", "per"; + dmas = <&sdma 2 4 0>, <&sdma 3 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; }; @@ -621,6 +627,8 @@ clocks = <&clks IMX5_CLK_UART5_IPG_GATE>, <&clks IMX5_CLK_UART5_PER_GATE>; clock-names = "ipg", "per"; + dmas = <&sdma 16 4 0>, <&sdma 17 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html