Hi Icenowy,
On 08/02/2016 12:13 AM, Icenowy Zheng wrote:
> A64 SoC features a MMC controller which need only the mod clock, and can
> calibrate delay by itself. This patch adds support for the new MMC
> controller IP core.
>
> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxxx>
> ---
> Changes in v2:
> - Rebased on Hans de Goede's patchset.
> Changes in v3:
> - Tidy up based on Hans de Goede's opinions.
>
> drivers/mmc/host/sunxi-mmc.c | 66 ++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 66 insertions(+)
>
> diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
> index 2ec91ce..3c26180 100644
> --- a/drivers/mmc/host/sunxi-mmc.c
> +++ b/drivers/mmc/host/sunxi-mmc.c
> @@ -72,6 +72,13 @@
> #define SDXC_REG_CHDA (0x90)
> #define SDXC_REG_CBDA (0x94)
>
> +/* New registers introduced in A64 */
> +#define SDXC_REG_A12A 0x058 /* SMC Auto Command 12 Register */
> +#define SDXC_REG_SD_NTSR 0x05C /* SMC New Timing Set Register */
> +#define SDXC_REG_DRV_DL 0x140 /* Drive Delay Control Register */
> +#define SDXC_REG_SAMP_DL_REG 0x144 /* SMC sample delay control */
> +#define SDXC_REG_DS_DL_REG 0x148 /* SMC data strobe delay control */
> +
> #define mmc_readl(host, reg) \
> readl((host)->reg_base + SDXC_##reg)
> #define mmc_writel(host, reg, value) \
> @@ -217,6 +224,15 @@
> #define SDXC_CLK_50M_DDR 3
> #define SDXC_CLK_50M_DDR_8BIT 4
>
> +#define SDXC_2X_TIMING_MODE BIT(31)
> +
> +#define SDXC_CAL_START BIT(15)
> +#define SDXC_CAL_DONE BIT(14)
> +#define SDXC_CAL_DL_SHIFT 8
> +#define SDXC_CAL_DL_SW_EN BIT(7)
> +#define SDXC_CAL_DL_SW_SHIFT 0
> +#define SDXC_CAL_DL_MASK 0x3f
> +
> struct sunxi_mmc_clk_delay {
> u32 output;
> u32 sample;
> @@ -232,6 +248,9 @@ struct sunxi_idma_des {
> struct sunxi_mmc_cfg {
> u32 idma_des_size_bits;
> const struct sunxi_mmc_clk_delay *clk_delays;
> +
> + /* does the IP block support autocalibration? */
> + bool can_calibrate;
> };
>
> struct sunxi_mmc_host {
> @@ -657,6 +676,38 @@ static int sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en)
> return 0;
> }
>
> +static int sunxi_mmc_calibrate(struct sunxi_mmc_host *host,
> + struct mmc_ios *ios, int reg_off)
Where is mmc_ios structure used in this function?
And why passing the reg_off?
> +{
> + u32 reg = readl(host->reg_base + reg_off);
> + u32 delay;
delay doesn't need to use u32..
reg_off is only passed with SDXC_REG_SAMP_DL_REG..this function doesn't reuse anywhere.
> +
> + if (!host->cfg->can_calibrate)
> + return 0;
> +
> + reg &= ~(SDXC_CAL_DL_MASK << SDXC_CAL_DL_SW_SHIFT);
> + reg &= ~SDXC_CAL_DL_SW_EN;
> +
> + writel(reg | SDXC_CAL_START, host->reg_base + reg_off);
> +
> + dev_dbg(mmc_dev(host->mmc), "calibration started\n");
> +
> + while (!((reg = readl(host->reg_base + reg_off)) & SDXC_CAL_DONE))
> + cpu_relax();
If never hit this condition, infinite loop?
> +
> + delay = (reg >> SDXC_CAL_DL_SHIFT) & SDXC_CAL_DL_MASK;
> +
> + reg &= ~SDXC_CAL_START;
> + reg |= (delay << SDXC_CAL_DL_SW_SHIFT) | SDXC_CAL_DL_SW_EN;
Something is strange. It seems to maintain the delay value.
reg &= ~(SDXC_CAL_START | (SDXC_CAL_DL_MASK << SDXC_CAL_DL_SHIFT));
reg |= SDXC_CAL_DL_SW_EN;
is it same thing?
> +
> + writel(reg, host->reg_base + reg_off);
> +
> + dev_dbg(mmc_dev(host->mmc), "calibration ended, res is 0x%x\n", reg);
s/res is/reg is ?
> +
> + /* TODO: enable calibrate on sdc2 SDXC_REG_DS_DL_REG of A64 */
> + return 0;
> +}
> +
> static int sunxi_mmc_clk_set_phase(struct sunxi_mmc_host *host,
> struct mmc_ios *ios, u32 rate)
> {
> @@ -731,6 +782,10 @@ static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host,
> if (ret)
> return ret;
>
> + ret = sunxi_mmc_calibrate(host, ios, SDXC_REG_SAMP_DL_REG);
> + if (ret)
> + return ret;
Never enter this condition. sunxi_mmc_calibrate() is always returned 0.
Best Regards,
Jaehoon Chung
> +
> return sunxi_mmc_oclk_onoff(host, 1);
> }
>
> @@ -982,21 +1037,31 @@ static const struct sunxi_mmc_clk_delay sun9i_mmc_clk_delays[] = {
> static const struct sunxi_mmc_cfg sun4i_a10_cfg = {
> .idma_des_size_bits = 13,
> .clk_delays = NULL,
> + .can_calibrate = false,
> };
>
> static const struct sunxi_mmc_cfg sun5i_a13_cfg = {
> .idma_des_size_bits = 16,
> .clk_delays = NULL,
> + .can_calibrate = false,
> };
>
> static const struct sunxi_mmc_cfg sun7i_a20_cfg = {
> .idma_des_size_bits = 16,
> .clk_delays = sunxi_mmc_clk_delays,
> + .can_calibrate = false,
> };
>
> static const struct sunxi_mmc_cfg sun9i_a80_cfg = {
> .idma_des_size_bits = 16,
> .clk_delays = sun9i_mmc_clk_delays,
> + .can_calibrate = false,
> +};
> +
> +static const struct sunxi_mmc_cfg sun50i_a64_cfg = {
> + .idma_des_size_bits = 16,
> + .clk_delays = NULL,
> + .can_calibrate = true,
> };
>
> static const struct of_device_id sunxi_mmc_of_match[] = {
> @@ -1004,6 +1069,7 @@ static const struct of_device_id sunxi_mmc_of_match[] = {
> { .compatible = "allwinner,sun5i-a13-mmc", .data = &sun5i_a13_cfg },
> { .compatible = "allwinner,sun7i-a20-mmc", .data = &sun7i_a20_cfg },
> { .compatible = "allwinner,sun9i-a80-mmc", .data = &sun9i_a80_cfg },
> + { .compatible = "allwinner,sun50i-a64-mmc", .data = &sun50i_a64_cfg },
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, sunxi_mmc_of_match);
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
