On Wednesday 27 November 2013 03:25 AM, Tony Lindgren wrote:
* Dan Murphy <dmurphy@xxxxxx> [131121 09:28]:
On 11/21/2013 10:58 AM, Tony Lindgren wrote:
* Balaji T K <balajitk@xxxxxx> [131121 05:51]:
pin mux wl12xx_gpio and wl12xx_pins should be part of omap4_pmx_core
and not omap4_pmx_wkup. So, move wl12xx_* to omap4_pmx_core.
Fix the following error message:
pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38)
pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x
Why is the led pins moved then?
Heh the patch just looks that way, looking at the curly brackets
thing do get moved properly.
SDIO card is not detected after moving pin mux to omap4_pmx_core since
sdmmc5_clk pull is disabled. Enable Pull up on sdmmc5_clk to detect SDIO card.
Cool, does this fix the issue with the WLAN not coming up after a warm reset
on panda?
Also commit f446043f1aa7 (regulator: fixed: fix regulator_list_voltage() for
regression) is needed that recently got merged. But with v3.13-rc1 +
f446043f1aa7 + this patch no luck whatsoever bringing up the wl12xx so there
must be also some regression somewhere from v3.12 on that?
Hi Tony,
I tried loading wl12xx as modules on latest base as yours with
ti-connectivity/wl127x-fw-5-sr.bin firmware in place and I could connect
and run iperf.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
