On Fri, Jul 29, 2016 at 6:45 PM, Rafał Miłecki <zajec5@xxxxxxxxx> wrote:
> From: Rafał Miłecki <rafal@xxxxxxxxxx>
>
> This clock is present on cheaper Northstar devices like BCM53573 or
> BCM47189 using Corex-A7. This driver uses PMU (Power Management Unit)
> to calculate clock rate and allows using it in a generic (clk_*) way.
>
> Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
> ---
> V2: Rebase on top of clk-next
> Use ALP as parent clock
> Improve comments
> Switch from ioremap_nocache to ioremap
> Check of_clk_add_provide result for error
> ---
> .../devicetree/bindings/clock/brcm,ns-ilp.txt | 26 ++++
> drivers/clk/bcm/Makefile | 1 +
> drivers/clk/bcm/clk-ns-ilp.c | 147 +++++++++++++++++++++
> 3 files changed, 174 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/brcm,ns-ilp.txt
> create mode 100644 drivers/clk/bcm/clk-ns-ilp.c
>
> diff --git a/Documentation/devicetree/bindings/clock/brcm,ns-ilp.txt b/Documentation/devicetree/bindings/clock/brcm,ns-ilp.txt
> new file mode 100644
> index 0000000..2c862a0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/brcm,ns-ilp.txt
> @@ -0,0 +1,26 @@
> +Broadcom Northstar ILP clock
> +============================
> +
> +This binding uses the common clock binding:
> + Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +This binding is used for ILP clock on Broadcom Northstar devices using
> +Corex-A7 CPU. ILP clock depends on ALP one and has to be calculated on
> +runtime.
> +
> +Required properties:
> +- compatible: "brcm,ns-ilp"
> +- reg: iomem address range of PMU (Power Management Unit)
> +- reg-names: "pmu", the only needed & supported reg right now
> +- clocks: has to reference an ALP clock
> +- #clock-cells: should be <0>
> +
> +Example:
> +
> +ilp: ilp {
> + compatible = "brcm,ns-ilp";
> + reg = <0x18012000 0x1000>;
> + reg-names = "pmu";
> + clocks = <&alp>;
> + #clock-cells = <0>;
> +};
> diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
> index 1d79bd2..1389379 100644
> --- a/drivers/clk/bcm/Makefile
> +++ b/drivers/clk/bcm/Makefile
> @@ -10,3 +10,4 @@ obj-$(CONFIG_COMMON_CLK_IPROC) += clk-ns2.o
> obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o
> obj-$(CONFIG_ARCH_BCM_NSP) += clk-nsp.o
> obj-$(CONFIG_ARCH_BCM_5301X) += clk-nsp.o
> +obj-$(CONFIG_ARCH_BCM_5301X) += clk-ns-ilp.o
> diff --git a/drivers/clk/bcm/clk-ns-ilp.c b/drivers/clk/bcm/clk-ns-ilp.c
> new file mode 100644
> index 0000000..0337313
> --- /dev/null
> +++ b/drivers/clk/bcm/clk-ns-ilp.c
> @@ -0,0 +1,147 @@
> +/*
> + * Copyright (C) 2016 Rafał Miłecki <rafal@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
I didn't see anything using modular content from the above header file, so
I think you can remove it.
Paul.
--
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/slab.h>
> +
> +#define PMU_XTAL_FREQ_RATIO 0x66c
> +#define XTAL_ALP_PER_4ILP 0x00001fff
> +#define XTAL_CTL_EN 0x80000000
> +#define PMU_SLOW_CLK_PERIOD 0x6dc
> +
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
