On Wednesday, July 27, 2016 8:21:46 AM EEST Maxime Ripard wrote:
> On Wed, Jul 27, 2016 at 08:12:29AM +0300, stefan.mavrodiev@xxxxxxxxx wrote:
> > > > +®_dcdc1 {
> > > > + regulator-always-on;
> > > > + regulator-min-microvolt = <3300000>;
> > > > + regulator-max-microvolt = <3300000>;
> > > > + regulator-name = "vcc-dsi";
> > > > +};
> > >
> > > What is it used for? Is it really necessary to keep it on at all time?
> >
> > I think so.
> > This is the supply for the MMC.
>
> Then it's poorly named, and you should tie it to the MMC, and remove
> the always-on if it's only used by the mmc. always-on is supposed to
> be for regulators that shouldn't but turned off for the system to stay
> running. Some MMC regulator doesn't fit that description.
>
It's named upon the A33 power pin - "VCC-DSI".
If I remove "always-on" the board still will work, since dcdc1 is tied to
mmc0.
vmmc-supply = <®_dcdc1>;
We assume this voltage will be always present and there are some pullups that
are tied to it (on i2c0 and i2c1 bus). In this case should I remove "always-
on" from the regulator node?
> Maxime
Best regards,
Stefan Mavrodiev
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
