If MT8173 can support HDMI 4K resoultion, the VENCPLL should be configured to 800MHZ. We didn't set VENCPLL directly, we set the mm_sel to 400MHz statically in the board device tree. Changes since v1: - Do not set the VENCPLL by clk_set_rate at display driver. - Configure the mm_sel to 400MHz statically in the board device tree. Signed-off-by: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx> --- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 78529e4..e89aca6 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -690,6 +690,8 @@ compatible = "mediatek,mt8173-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mmsel"; #clock-cells = <1>; }; @@ -858,8 +860,8 @@ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DPI_PIXEL>, - <&mmsys CLK_MM_DPI_ENGINE>, - <&apmixedsys CLK_APMIXED_TVDPLL>; + <&mmsys CLK_MM_DPI_ENGINE>, + <&apmixedsys CLK_APMIXED_TVDPLL>; clock-names = "pixel", "engine", "pll"; status = "disabled"; }; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
