On Tue, Jul 26, 2016 at 03:04:29PM +0800, Chen-Yu Tsai wrote:
> On sunxi we support cpufreq by changing the clock rate of PLL-CPU.
> It's possible the clock output of the PLL goes out of the CPU's
> operational limits when the PLL's multipliers / dividers are changed
> and it hasn't stabilized yet. This would result in the CPU hanging.
>
> To circumvent this, we temporarily switch the CPU mux clock to another
> stable clock before the rate change, and switch it back after the PLL
> stabilizes. This is done with clk notifiers registered on the PLL.
>
> This patch adds common functions for notifiers to reparent mux clocks.
>
> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
> ---
> drivers/clk/sunxi-ng/ccu_mux.c | 36 ++++++++++++++++++++++++++++++++++++
> drivers/clk/sunxi-ng/ccu_mux.h | 14 ++++++++++++++
> 2 files changed, 50 insertions(+)
>
> diff --git a/drivers/clk/sunxi-ng/ccu_mux.c b/drivers/clk/sunxi-ng/ccu_mux.c
> index f96eabb5d1f3..8a6e9065cb85 100644
> --- a/drivers/clk/sunxi-ng/ccu_mux.c
> +++ b/drivers/clk/sunxi-ng/ccu_mux.c
> @@ -8,7 +8,9 @@
> * the License, or (at your option) any later version.
> */
>
> +#include <linux/clk.h>
> #include <linux/clk-provider.h>
> +#include <linux/delay.h>
>
> #include "ccu_gate.h"
> #include "ccu_mux.h"
> @@ -199,3 +201,37 @@ const struct clk_ops ccu_mux_ops = {
> .determine_rate = __clk_mux_determine_rate,
> .recalc_rate = ccu_mux_recalc_rate,
> };
> +
> +/*
> + * This clock notifier is called when the frequency of the of the parent
> + * PLL clock is to be changed. The idea is to switch the parent to a
> + * stable clock, such as the main oscillator, while the PLL frequency
> + * stabilizes.
> + */
> +static int ccu_mux_notifier_cb(struct notifier_block *nb,
> + unsigned long event, void *data)
> +{
> + struct ccu_mux_nb *mux = to_ccu_mux_nb(nb);
> + int ret = 0;
> +
> + if (event == PRE_RATE_CHANGE) {
> + mux->original_index = ccu_mux_helper_get_parent(mux->common,
> + mux->cm);
> + ret = ccu_mux_helper_set_parent(mux->common, mux->cm,
> + mux->bypass_index);
> + } else if (event == POST_RATE_CHANGE) {
> + ret = ccu_mux_helper_set_parent(mux->common, mux->cm,
> + mux->original_index);
> + }
> +
> + udelay(mux->delay_us);
Are you sure we need that delay?
set_rate will end and notify you once the PLL rate is stable, so it
looks redundant.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Attachment:
signature.asc
Description: PGP signature
