This driver is used with the J2, an open-source VHDL reimplementation of SH-2. I've split this out from the main J-Core support patches going upstream through my own linux-sh tree. Changes since the v3 are mainly cleanup/simplification, inclusion of sched_clock support based on suggestions by Daniel Lezcano, and reworking the DT bindings to use separate reg ranges per cpu rather than cpu-offset for greater flexibility. Rich Rich Felker (2): of: add J-Core timer bindings clocksource: add J-Core timer/clocksource driver .../devicetree/bindings/timer/jcore,pit.txt | 25 ++ drivers/clocksource/Kconfig | 8 + drivers/clocksource/Makefile | 1 + drivers/clocksource/jcore-pit.c | 277 +++++++++++++++++++++ 4 files changed, 311 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/jcore,pit.txt create mode 100644 drivers/clocksource/jcore-pit.c -- 2.8.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html