On Wed, Jul 20, 2016 at 10:06:23AM +0200, Rafał Miłecki wrote:
> On 20 July 2016 at 03:02, Rob Herring <robh@xxxxxxxxxx> wrote:
> > On Fri, Jul 15, 2016 at 11:10:45PM +0200, Rafał Miłecki wrote:
> >> This commit adds a new trigger that can turn on LED when USB device gets
> >> connected to the USB port. This can be useful for various home routers
> >> that have USB port and a proper LED telling user a device is connected.
> >>
> >> Right now this trigger is usable with a proper DT only, there isn't a
> >> way to specify USB ports from user space. This may change in a future.
> >>
> >> Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx>
> >> ---
> >> V2: The first version got support for specifying list of USB ports from
> >> user space only. There was a (big try &) discussion on adding DT
> >> support. It led to a pretty simple solution of comparing of_node of
> >> usb_device to of_node specified in usb-ports property.
> >> Since it appeared DT support may be simpler and non-DT a bit more
> >> complex, this version drops previous support for "ports" and
> >> "new_port" and focuses on DT only. The plan is to see if this
> >> solution with DT is OK, get it accepted and then work on non-DT.
> >>
> >> Felipe: if there won't be any objections I'd like to ask for your Ack.
> >> ---
> >> Documentation/devicetree/bindings/leds/common.txt | 11 ++
> >> Documentation/leds/ledtrig-usbport.txt | 19 ++
> >> drivers/leds/trigger/Kconfig | 8 +
> >> drivers/leds/trigger/Makefile | 1 +
> >> drivers/leds/trigger/ledtrig-usbport.c | 206 ++++++++++++++++++++++
> >> 5 files changed, 245 insertions(+)
> >> create mode 100644 Documentation/leds/ledtrig-usbport.txt
> >> create mode 100644 drivers/leds/trigger/ledtrig-usbport.c
> >>
> >> diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
> >> index af10678..75536f7 100644
> >> --- a/Documentation/devicetree/bindings/leds/common.txt
> >> +++ b/Documentation/devicetree/bindings/leds/common.txt
> >> @@ -50,6 +50,12 @@ property can be omitted.
> >> For controllers that have no configurable timeout the flash-max-timeout-us
> >> property can be omitted.
> >>
> >> +Trigger specific properties for child nodes:
> >> +
> >> +usbport trigger:
> >> +- usb-ports : List of USB ports that usbport should observed for turning on a
> >> + given LED.
> >
> > I think this should be more generic such that it could work for disk or
> > network LEDs too. Perhaps 'led-triggers = <nodes>'? trigger is a bit of
> > a Linux name, but I haven't thought of anything better. Really, I'd
> > prefer the link in the other direction (e.g. port node have a 'leds" or
> > '*-leds' property), but that's maybe harder to parse.
>
> I was already thinking on this as I plan to add "netdev" trigger at
> some point in the future. I'd like to use "net-devices" for it (as a
> equivalent or "usb-ports").
>
> However there is a problem with your idea of sharing "led-triggers"
> between triggers.. Consider device with generic purpose LED that
> should be controllable by a user. I believe we should let user switch
> it's state, e.g. with:
> echo usbport > trigger
> echo netdev > trigger
> with a shared property I don't see how we couldn't handle it properly.
Well, the userspace interface and DT bindings are independent things.
You can't argue for what the DT binding should look like based on the
userspace interface.
Perhaps we need a "device trigger" where you echo the device to
be the trigger (similar to how bind works). If you have something to id
the device, then you can lookup its struct device and then its of_node
ptr.
The other problem with your userspace interface is it only works if
the trigger is defined in DT. It doesn't allow for specifying which usb
port or which netdev. Any trigger source should be assignable to any
LED? I can assign the disk activity trigger to the numlock LED if I
want to...
> I don't think we can use anything like:
> led-triggers = <&ohci_port1>, <&ehci_port1>, <ðmac0>;
> I'd get even more complicated if we ever need cells for any trigger.
> AFAIK it's not allowed to mix handles with different cells like:
> led-triggers = <&ohci_port1>, <&foo 5>, <ðmac0>;
It is allowed, but you would have to have a '#led-trigger-cells'
property in each phandle target.
> These problems made me use trigger-specific properies for specifying
> LED triggers. Do you have any other idea for sharing a property &
> avoiding above problems at the same time?
>
>
> >> +
> >> Examples:
> >>
> >> system-status {
> >> @@ -58,6 +64,11 @@ system-status {
> >> ...
> >> };
> >>
> >> +usb {
> >> + label = "USB";
> >
> > It's not really clear in the example this is an LED node as it is
> > incomplete.
>
> What do you mean by incomplete? Should I include e.g. ohci_port1 in
> this example?
label and usb-ports alone in this node does not make an LED node.
>
>
> >> + usb-ports = <&ohci_port1>, <&ehci_port1>;
> >> +};
> >> +
> >> camera-flash {
> >> label = "Flash";
> >> led-sources = <0>, <1>;
> >> diff --git a/Documentation/leds/ledtrig-usbport.txt b/Documentation/leds/ledtrig-usbport.txt
> >> new file mode 100644
> >> index 0000000..642c4cd
> >> --- /dev/null
> >> +++ b/Documentation/leds/ledtrig-usbport.txt
> >> @@ -0,0 +1,19 @@
> >> +USB port LED trigger
> >> +====================
> >> +
> >> +This LED trigger can be used for signaling user a presence of USB device in a
> >> +given port. It simply turns on LED when device appears and turns it off when it
> >> +disappears.
> >> +
> >> +It requires specifying a list of USB ports that should be observed. This can be
> >> +done in DT by setting a proper property with list of a phandles. If more than
> >> +one port is specified, LED will be turned on as along as there is at least one
> >> +device connected to any of ports.
> >> +
> >> +This trigger can be activated from user space on led class devices as shown
> >> +below:
> >> +
> >> + echo usbport > trigger
> >
> > Why do I have to do this (by default)? I already specified in the DT
> > what the connection is. It should come up working OOTB, or don't put it
> > in DT.
>
> Just specifying connection with "usb-ports" (or "led-triggers") won't
> enable a given trigger and it shouldn't. There is already a way to
> specify default trigger using property "linux,default-trigger". So you
> can specify:
> 1) Default one with:
> linux,default-trigger = "usbport";
> 2) On runtime:
> echo usbport > trigger
IMO, these should be mutually exclusive. Either you specify a DT node as
the trigger or you specify a linux specific trigger.
> >> +Nevertheless, current there isn't a way to specify list of USB ports from user
> >> +space.
> >
> > s/current/currently/
> >
> > This is a problem since if it works by default and you switch to a
> > different trigger, there's no way to get back to the default (unless
> > you remember the ports).
>
> There is no such problem. You can freely do:
> echo none > trigger
> (e.g. to disable LED during night or whatever)
> and then:
> echo usbport > trigger
>
> This will make "usbport" use triggers specified in DT as expected.
I think the singular "usbport" trigger is problematic. Look at how cpu
triggers are done. I can specify which cpu is the trigger. You should be
able specify which port is the trigger, too.
In summary, I guess what I'm saying is don't push the problems of the
current userspace interface down to DT.
Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
