Hi Eric, > Eric Anholt <eric@xxxxxxxxxx> hat am 20. Juli 2016 um 21:36 geschrieben: > > > Stefan Wahren <stefan.wahren@xxxxxxxx> writes: > > > Hi Lubomir, > > > >> Lubomir Rintel <lkundrak@xxxxx> hat am 4. Februar 2016 um 08:39 > >> geschrieben: > >> > >> > >> Notable difference from the other Raspberry Pi boards is the lack of PWR > >> LED. > >> > >> Signed-off-by: Lubomir Rintel <lkundrak@xxxxx> > > > > do you have any plans to submit a V2 of this patch or should i take over? > > It's been a while, so I'd love if you picked it up and resubmitted with > the LED changes. i also want to take care of those dwc2 warnings, which might need some additional DT settings: dwc2 20980000.usb: 256 invalid for host_nperio_tx_fifo_size. Check HW configuration. dwc2 20980000.usb: 512 invalid for host_perio_tx_fifo_size. Check HW configuration. dwc2 20980000.usb: Specified GNPTXFDEP=1024 > 32 What LED change do you expect? Lubomir's suggestion is HIGH_ACTIVE which is more userfriendly because of the missing PWR LED. Changing to LOW_ACTIVE would be more stringent according to all the other RPis. Btw the DTS for the RPi Zero has been dropped in downstream. Regards Stefan -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
