Add documention of ti,impedance-control which can be used to correct MAC impedance mismatch using phy extended registers. Signed-off-by: Mugunthan V N <mugunthanvnm@xxxxxx> --- Documentation/devicetree/bindings/net/ti,dp83867.txt | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt index 5d21141..531ea3c5 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.txt +++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt @@ -9,6 +9,13 @@ Required properties: - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable values +Optional property: + - ti,impedance-control - MAC Interface Impedance control to vary the + output impedance with an approximate range + from 35-70 ohms in 32 steps. Value range can + be 0x0 to 0x1f. Lowest impedance value is + 0x1f and highest impedance being 0x0. + Default child nodes are standard Ethernet PHY device nodes as described in Documentation/devicetree/bindings/net/phy.txt -- 2.9.2.368.g08bb350 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html