Set OTG2 over current flag to be active low, OTG1 OC is not used by default. Signed-off-by: Li Jun <jun.li@xxxxxxx> --- arch/arm/boot/dts/imx7d-sdb.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index b267f79..44ed399 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -287,7 +287,9 @@ &usbotg2 { vbus-supply = <®_usb_otg2_vbus>; + pinctrl-0 = <&pinctrl_usbotg2>; dr_mode = "host"; + over-current-polarity = <0>; status = "okay"; }; @@ -415,6 +417,12 @@ >; }; + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO06__USB_OTG2_OC 0x59 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX7D_PAD_SD1_CMD__SD1_CMD 0x59 -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html