On Sun, Jul 17, 2016 at 12:15:23AM +0900, Masahiro Yamada wrote: > The "clock-output-names" property is useful for generic clock > providers such as fixed-clock, fixed-factor-clock, etc. > > On the other hand, it should not be used for really SoC-specific > clock providers like this one. As you see in "enum zynq_clk" in > this driver, it is written as if it already knows all the clock > names. Besides, this is instantiated only once, so no clock name > conflict would happen even if the clock names are hard-coded in the > driver. > > The device tree (arch/arm/boot/dts/zynq-7000.dtsi) will be fixed > later. This should be done now so dts files and docs are in sync. > Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx> > --- > > This patch was tested on Zynq Zedboard. > > > .../devicetree/bindings/clock/zynq-7000.txt | 13 ------------- > drivers/clk/zynq/clkc.c | 21 ++++++++++++--------- > 2 files changed, 12 insertions(+), 22 deletions(-) Acked-by: Rob Herring <robh@xxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
